Abstract:Pulse wave carries comprehensive information regarding the human cardiovascular system (CS), which is essential for directly capturing CS parameters. More importantly, cuffless blood pressure (BP) is one of the most critical markers in CS. Accurately measuring BP via the pulse wave for continuous and noninvasive diagnosis of a disease associated with hypertension remains a challenge and highly desirable. Here, a flexible weaving constructed self‐powered pressure sensor (WCSPS) is reported for measurement of the pulse wave and BP in a noninvasive manner. The WCSPS holds an ultrasensitivity of 45.7 mV Pa−1 with an ultrafast response time of less than 5 ms, and no performance degradation is observed after up to 40 000 motion cycles. Furthermore, a low power consumption sensor system is developed for precisely monitoring pulse wave from the fingertip, wrist, ear, and ankles. A practical measurement is performed with 100 people with ages spanning from 24 to 82 years and different health statuses. The discrepancy between the measured BP results using the WCSPS and that provided by the commercial cuff‐based device is about 0.87–3.65%. This work demonstrates an efficient and cost‐effective way for human health monitoring, which would be a competitive alternative to current complex cardiovascular monitoring systems. A flexible and wearable weaving constructed self‐powered pressure sensor is demonstrated for human health monitoring, which can measure and record the human pulse wave and cuffless blood pressure in a noninvasive manner. Based on the acquired pulse wave data, a user‐friendly and low power consumption sensor system is developed for continuous human health assessment with no restrictions on time and place.

Portable cardiovascular function detection system based on pulse wave

WIB: Real-time, Non-intrusive Blood Pressure Detection Using Smartphones

Non-contact Monitoring of Ambulatory Blood Pressure Based on Webcam

Wearable Pulse Wave Monitoring System Based On Mems Sensors

A Non-invasive Continuous Blood Pressure Measurement System Based on Pulse Wave Velocity

Dual-modality arterial pulse monitoring system for continuous blood pressure measurement.

Continuous and Noninvasive Measurement of Arterial Pulse Pressure and Pressure Waveform using an Image-free Ultrasound System

Wearable Physiological Multi-Vital Sign Monitoring System With Medical Standard

[Wireless Pulse Wave Monitoring System Based on Reflective Flexible Probe and AFE4490]

Flexible Weaving Constructed Self‐Powered Pressure Sensor Enabling Continuous Diagnosis of Cardiovascular Disease and Measurement of Cuffless Blood Pressure

A Wearable Multifunctional Pulse Monitor Using Thermosensation-Based Flexible Sensors.

[Arm-Based Embedded Detection System of Cardiovascular Function Parameters].

A Multi - Pulse Wave Velocity Acquisition System Based on Waveform Analysis Method

Human Pulse Diagnosis For Medical Assessments Using A Wearable Piezoelectret Sensing System

An Ambulatory Blood Pressure Monitoring System Based on the Uncalibrated Steps of the Wrist

Non-invasive Blood Pressure Measure Based on Wavelet Transform

Synchronized wearables for the detection of haemodynamic states via electrocardiography and multispectral photoplethysmography

[Design of Pulse and Respiratory Signals Detection System]

[Portable Instrument for Arteriosclerosis Assessment].

A Digital Signal Processor(dsp)-Based System for Embedded Continuous-Time Cuffless Blood Pressure Monitoring Using Single-Channel PPG Signal

Multi-Point Near-Field RF Sensing of Blood Pressures and Heartbeat Dynamics