Abstract:Background It is crucial to introduce new strategies to intensify the efficiency of photovoltaic thermal (PVT) unit. The incorporation of a thermoelectric generator (TEG) within a solar unit can notably improve its electrical performance. Additionally, modifying the properties of the cooling fluid by incorporating nano-powders proves to be an effective approach in optimizing PVT systems. Methods This study delves into an inventive design for a PVT unit, exploring novel techniques to boost its performance. To enhance the cooling of the PV component, two strategies were employed: 1) the implementation of a new-style turbulator, and 2) the integration of confined jets. Thus, three cases were simulated: case 1 (without any enhancement), case 2 (with the turbulator), and case 3 (employing both techniques). Additionally, the TEG layer was incorporated with the PV layers to augment overall efficiency. The testing fluid, water, was infused with SiO 2 nanoparticles, and their properties were determined using a homogeneous mixture formulation. For simulating the current 3D model, the Finite Volume Method was chosen, accounting for laminar flow in fluid zones and applying the pure conduction equation for solid zones. The impacts of altering geometry, heat flux (G), inlet velocity within the tube (V i ), and jet (V j ) on performance metrics (including PV electrical (η PV ), thermoelectric (η TE ), thermal (η th ), overall electrical (η El ), total (η Tot )) have been detailed in the results section. Significant findings By implementing two cooling techniques, the uniformity of panel temperature experiences a notable enhancement of about 79.96 %. With an increase in the velocity of the nanofluid within the tube, there is an approximately 1.99 % improvement in the value of η Tot . Furthermore, when V i =0.08 m/s, the values of η El , and η Tot see an increase of about 3.09 % and 12.59 %, respectively, upon the installation of the jet and turbulator. An augmentation in G leads to a rise in η Tot by approximately 5.32 % and 7.32 % for cases 1 and 3, respectively. When G = 810 W/m 2 , incorporating a jet and turbulator in the PVT system results in improvements of about 2.64 % in η El , and 10.45 % in η Tot . The increment of η Tot with switching from case 1 to case 3 enhances about 24.62 % with the rise of G. Moreover, as the inlet velocity of the jet increases, the values of η TE , η th , and η Tot enhance by about 3.43 %, 1.87 %, and 1.06 %, respectively. Graphical abstract Download : Download high-res image (124KB) Download : Download full-size image

The Entropy Generation Analysis and Optimization of a Water/silver Nanofluid Flow Inside a Photovoltaic Thermal Collector Considering Plain, Ribbed, and Porous-Ribbed Absorber Tubes

The entropy generation analysis of a PVT solar collector with internally needle finned serpentine absorber tube

Entropy generation during Al 2 O 3 /water nanofluid flow in a solar collector: Effects of tube roughness, nanoparticle size, and different thermophysical models

Second Law Analysis of a Nanofluid-Based Solar Collector Using Experimental Data

Comparative performance assessment of different absorber tube geometries for parabolic trough solar collector using nanofluid

Performance Analysis of a Minichannel-Based Solar Collector Using Different Nanofluids

Thermal and Thermodynamic Comparison of Smooth and Convergent‐divergent Parabolic Trough Absorber Tubes with the Application of Mono and Hybrid Nanofluids

Numerical Analysis of Photovoltaic-Thermal Collector Using Nanofluid As a Coolant

Enhanced heat transfer performance in a parabolic trough solar collector: A CFD investigation of silver and copper nanofluids utilizing porous medium

Environmental and energy analysis for photovoltaic-thermoelectric solar unit in existence of nanofluid cooling reporting CO 2 emission reduction

Heat transfer study of a new hybrid photovoltaic/thermal direct absorption parabolic solar collector by two-phase Buongiorno model

Heat Transfer, Pressure Drop, and Entropy Generation in a Solar Collector Using SiO2/Water Nanofluids: Effects of Nanoparticle Size and Ph

Novel entropy generation and optimization for hybrid nanofluid flow via ribbed surface parabolic trough collector

Use of machine learning in predicting heat transfer and entropy generation in a flat plate solar collector with twisted tape turbulator and ferrofluid under the influence of an external uniform magnetic field: A numerical study

First and Second Laws Analysis of a Minichannel-Based Solar Collector Using Boehmite Alumina Nanofluids: Effects of Nanoparticle Shape and Tube Materials

Energy and exergy analysis of a newly designed photovoltaic thermal system featuring ribs, petal array, and coiled twisted tapes: Experimental analysis

Numerical analysis and design of a novel solar photovoltaic thermal system using finned cooling channel structures embedded with air/TiO 2 –water nano bi-fluid

Application of hybrid nanofluids in a novel combined photovoltaic/thermal and solar collector system

Entropy Generation Analysis and Thermal Performance of Absorber Tube in Parabolic Trough Solar Collector Inserted with Eccentric Structure Insert

Thermal Performance Analysis of Porous Foam-Assisted Flat-Plate Solar Collectors with Nanofluids

Thermal performance simulation of parabolic trough collector with ternary nanofluid flows and half-star-shaped fins inserts in different receivers