Abstract:Assembly construction is the main feature of industrialized bridges, and π-shaped section steel–concrete composites that are continuously rigid have been widely used in engineering fields in recent years; however, their dynamic responses and corresponding impact coefficients in positive and negative moment regions need to be further studied. First, considering the interface slip model, we established a finite element model for the π-shaped continuous region section of the steel–concrete composite on the Sutai Expressway Tongfu No. 3 viaduct. Second, the bridge deck unevenness parameters were generated by preparing a MATLAB program with random calculations and were added to the bridge deck as the excitation load along with the vehicle load. Such parameters are defined on the basis of considering the vertical degrees of freedom of the four wheels and of one vehicle rigid body. Finally, we analyzed the displacement or stress impact coefficients as the dynamic response index of the bridge by adjusting the vehicle travel speeds, vehicle weights, interface slip stiffness values, and deck unevenness values. The results show that the change in vehicle travel speed and the change in vehicle load weight have some influence on the change in the dynamic effect of the combined beam, but this change is not significant. Moreover, the unevenness and interface slip strength changes have a large effect on the dynamic effect of the combination beam, which can significantly change the impact coefficient of the combination beam bridge. The worse the unevenness of the bridge deck is, the lower the grade of interface slip for the steel–concrete composite bridges and the higher the impact coefficient. We calculated the recommended impact coefficient values of the steel–concrete composite bridge based on the specifications for various countries, and they range from 1.16 to 1.4; such values are similar to the finite element calculation results.

Analysis on Mechanical Performance of Rail-Cum-Road Double Deck Steel Truss-Arch Composite System Bridge

Experimental Study and Numerical Analysis of A Composite Bridge Structure

Case Study on Stability Performance of Asymmetric Steel Arch Bridge with Inclined Arch Ribs

Fatigue Performance Assessment of Composite Arch Bridge Suspenders Based on Actual Vehicle Loads

Study on FE Models in Elasto-Plastic Seismic Performance Evaluation of Steel Arch Bridge

Investigation of elasto-plastic seismic response analysis method for complex steel bridges

Impact Factor Characteristics Of Double Parabolic Arch Ribs In A Cfst Arch Bridge Due To Vehicle Loads

Investigation of the Fatigue Stress of Orthotropic Steel Decks Based on an Arch Bridge with the Application of the Arlequin Method

Research on computational method and dynamic characteristics of traffic vibration of steel bridge

Comparison Study on Stability Behavior Between Steel Pipe Arch Bridge and CFST Truss Arch Bridge

Approach for Analyzing the Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges with Stiffening Girder

Simulation Vibration Analysis of Train and Railway Continuous Steel Truss Bridge

Mechanical Behavior of Box Girder Bridge with Partial Corrugated Steel Webs

Numerical Study on the Mechanical Performance of a Flexible Arch Composite Bridge with Steel Truss Beams over Its Entire Lifespan

Influence analysis of group studs stiffness in accelerated construction steel-concrete composite small box girder bridges

Field Test and Analysis for the Static and Dynamic Behaviour of Multi-Box Steel Concrete Composite Girder Bridge

Existing Railway Steel Truss Bridge Static Experimental Analysis Based on Full-Bridge-Model

Research on the Mechanical Performance of a Mountainous Long-Span Steel Truss Arch Bridge with High and Low Arch Seats

FINITE ELEMENT SIMULATION ANALYSIS OF STEEL TRUSS ARCH BRIDGE JACKING CONSTRUCTION

Numerical Investigation on the Dynamic Performance of Steel–Concrete Composite Continuous Rigid Bridges Subjected to Moving Vehicles

THEORETICAL STUDY ON THE IMPACT FACTOR OF CRESCENT-SHAPED MULTI-RIB CONCRETE FILLED STEEL TUBE TRUSS ARCH BRIDGES