Abstract:The Pancharatnam–Berry (PB)-phase liquid crystal (LC) planar optical elements, featuring large apertures and a light weight, are emerging as the new generation optics. The primary method for fabricating large-aperture LC planar optical elements is through photo-alignment, utilizing polarization laser direct writing. However, conventional polarization direct writing suffers from an inertia-induced stopping step during splicing, leading to suboptimal optical effects. Here, we propose a novel highly efficient method for arbitrary polarization patterning, significantly reducing interface splicing errors in these optical elements. (We call it dynamic polarization patterning technology). This process involves simultaneous mobile splicing and real-time generation of different polarization patterns for exposure, eliminating the inertia-related splicing interruption. As a demonstration, we fabricated a lens with an aperture of approximately 1 cm within 30 min at 633 nm. Furthermore, we developed a 100% fill-factor lens array (3 × 3) with an element lens diameter of approximately 7 mm within 1.5 h at 532 nm. Their focal lengths were uniformly set at 30 cm, demonstrating superior convergence capabilities within their designated working wavelengths, alongside commendable performance in converging light across various other wavelengths. Our measurements confirmed the good focusing performance of these samples. The convergence spot size of the lens deviated by approximately 40% from the theoretical diffraction limit, whereas the lens array exhibited a deviation of around 30%. The dynamic polarization direct writing during uniform platform movement reduced splicing errors to a mere 100–200 nm. The enhancement in imaging quality can be primarily attributed to the innovative use of mobile polarization splicing exposure technology, coupled with the inherent self-smoothing properties of LC molecules. This synergy significantly mitigates the impact of seam diffraction interference.

Inside Front Cover: Helical Structure Endows Liquid Crystal Planar Optics with a Customizable Working Band (Adv. Quantum Technol. 2/2023)

Helical Structure Endows Liquid Crystal Planar Optics with a Customizable Working Band

Heliconical Cholesterics Endows Spatial Phase Modulator with an Electrically Customizable Working Band

Liquid‐Crystal‐Mediated Geometric Phase: From Transmissive to Broadband Reflective Planar Optics

Planar Terahertz Photonics Mediated by Liquid Crystal Polymers

Chirality invertible superstructure mediated active planar optics

Cholesteric Liquid Crystals: Rationally Designed Dynamic Superstructures Enabled by Photoaligning Cholesteric Liquid Crystals (advanced Optical Materials 12/2015)

On-chip Wavefront Shaping in Spacing-Varied Waveguide Arrays

Dynamic Polarization Patterning Technique for High-Quality Liquid Crystal Planar Optics

Rationally Designed Dynamic Superstructures Enabled by Photoaligning Cholesteric Liquid Crystals

Liquid‐Crystal‐Mediated Active Waveguides Toward Programmable Integrated Optics

Tunable Band-Pass Optical Vortex Processor Enabled by Wash-out-refill Chiral Superstructures

54.2: Invited Paper: Liquid Crystal Based Optical Processing

Photoresponsive Materials: Photoprogrammable Mesogenic Soft Helical Architectures: A Promising Avenue toward Future Chiro‐Optics (Adv. Mater. 41/2020)

Cascaded chiral birefringent media enabled planar lens with programable chromatic aberration

Spin‐Decoupled Transflective Spatial Light Modulations Enabled by a Piecewise‐Twisted Anisotropic Monolayer

A Fast-Response and Helicity-Dependent Lens Enabled by Micro-Patterned Dual-Frequency Liquid Crystals

Pancharatnam–Berry Phase Reversal Via Opposite-Chirality-coexisted Superstructures

Digital photoprogramming of liquid-crystal superstructures featuring intrinsic chiral photoswitches

Photoalignment Enabled Liquid Crystal Microstructures for Optics and Photonics

Bi‐Chiral Nanostructures Featuring Dynamic Optical Rotatory Dispersion for Polychromatic Light Multiplexing (Adv. Mater. 33/2023)