Abstract:Thermochemical conversion of biomass has been studied extensively over the last decades. For the design, optimization and modeling of thermochemical conversion processes, such as fixed bed pyrolysis, a sound understanding of pyrolysis is essential. However, the decomposition mechanism of most biomass types into gaseous, liquid, and solid fractions is still unknown because of the complexity of pyrolysis and differences in biomass composition.The aim of this study was to find characteristic differences in the pyrolysis behavior of three widely used biomass feedstocks to optimize the performance of industrial fixed bed pyrolysis. This aim was achieved in three steps. First, devolatilization kinetics during pyrolysis of three biomass types was investigated in a thermogravimetric analyzer (TGA). Then, a one-step multi-component pyrolysis model with three independent parallel reactions for hemicellulose, cellulose and lignin was derived to correlate the kinetics with single component decomposition and to identify their amount in the biomass sample. In a final step, the findings were tested in a fixed bed reactor at laboratory scale to prove applicability in industrial processes.Three types of biomass were chosen for this investigation: wheat straw, rape straw and spruce wood with bark. They represent biomass with a high cellulose, hemicellulose and lignin content, respectively. Since lignin is the most stable and complex of these three biomass components, its amount is assumed to be the main controlling factor in the thermochemical decomposition process.The thermogravimetric (TG) curve of spruce wood with bark was found to shift to about 20K higher temperatures compared to the TG curves of straw and rape straw. This result indicates that a higher activation energy is needed to decompose woody biomass, which contains a higher amount and a different type of lignin than straw. Three wood decomposition phases were distinguished from the negative first derivatives curves (DTG): a shoulder during hemicellulose decomposition, a peak during cellulose decomposition and a smaller rise during lignin decomposition. By comparison both herbaceous biomass types decomposed in only two phases at lower temperatures. The decomposition of the herbaceous, and woody biomass samples was completed at about 830K and 900K, respectively, leaving only a solid residue of ash. The derived pyrolysis model estimated the composition and described the devolatilization curves of each biomass with sufficient accuracy for industrial processes, although the same activation energy set, taken from the literature, was used for each biomass. In the fixed bed pyrolysis experiments similar characteristics were found to those in the TGA experiments. Herbaceous biomass with a higher cellulose and hemicellulose content decomposed faster and produced a larger fraction of gaseous products than woody biomass with a higher lignin content. According to the assessment of the product distribution, performed after each experiment, woody biomass pyrolysis led to a larger fraction of solid products than herbaceous biomass pyrolysis. We conclude that industrial fixed bed pyrolysis can be optimized for different biomass feedstocks with a specific composition of cellulose, hemicellulose and lignin.

Understanding Pyrolysis of Biomass Waste Residues: Pyrolysis Behaviour, Kinetics, Thermodynamics, and Mechanism Investigations

Biomass Pyrolytic Polygeneration of Tobacco Waste: Product Characteristics and Nitrogen Transformation

Mechanism Study of Tobacco Pyrolysis Based on the Analysis of Characteristic Products and In-Situ Identification of Functional Groups Evolution on Pyrolytic Char

Experimental and Kinetic Studies on Tobacco Pyrolysis under a Wide Range of Heating Rates

The Effect of Oxygen on In-Situ Evolution of Chemical Structures During the Autothermal Process of Tobacco

Challenges and Perspectives of the Conversion of Lignin Waste to High-Value Chemicals by Pyrolysis

Pyrolysis as a Method for Processing of Waste from Production of Cultivated Tobacco (Nicotiana tabacum L.)

Insights into Pyrolysis and Co-Pyrolysis of Tobacco Stalk and Scrap Tire: Thermochemical Behaviors, Kinetics, and Evolved Gas Analysis

Pyrolysis characteristics and kinetic analysis of tobacco stem pretreated with different solvents

Pyrolysis Properties Of Potential Biomass Fuels In Southwestern China

Investigation on Pyrolysis and Carbonization of Eupatorium Adenophorum Spreng and Tobacco Stem

Pyrolysis of transformer insulating paperboard: determining kinetics, reaction mechanism, thermodynamic characteristics and volatile products using TG-FTIR and Py-GC/MS analyses

Experimental Investigation of Biomass Waste, (Rice Straw, Cotton Stalk, and Pine Sawdust), Pyrolysis Characteristics

Research on the Pyrolysis Mechanism of Tobacco Based on Low Temperature Torrefaction

The effect of the biomass components lignin, cellulose and hemicellulose on TGA and fixed bed pyrolysis

Toba-CPD: an Extended Chemical Percolation Devolatilization Model for Tobacco Pyrolysis.

TGA Pyrolysis and Gasification of Combustible Municipal Solid Waste

Heterogeneous Dynamic Behavior and Synergetic Evolution Mechanism of Internal Components and Released Gases during the Pyrolysis of Aquatic Biomass.

The effect of glycerol additive on high value-added chemicals from tobacco waste pyrolysis

Production of bio-oils enriched with aroma compounds from tobacco waste fast pyrolysis in a fluidized bed reactor

Evaluation of Kinetic and Thermodynamic Parameters of Pyrolysis and Combustion Processes for Bamboo Using Thermogravimetric Analysis