Abstract:Smart clothing is a sort of wearable device used for ubiquitous health monitoring. It provides comfort and efficiency in vital sign measurements and has been studied and developed in various types of monitoring platforms such as T-shirt and sports bra. However, despite these previous approaches, smart clothing for electrocardiography (ECG) monitoring has encountered a serious shortcoming relevant to motion artifacts caused by wearer movement. In effect, motion artifacts are one of the major problems in practical implementation of most wearable health-monitoring devices. In the ECG measurements collected by a garment, motion artifacts are usually caused by improper location of the electrode, leading to lack of contact between the electrode and skin with body motion. The aim of this study was to suggest a design for ECG–monitoring clothing contributing to reduction of motion artifacts. Based on the clothing science theory, it was assumed in this study that the stability of the electrode in a dynamic state differed depending on the electrode location in an ECG-monitoring garment. Founded on this assumption, effects of 56 electrode positions were determined by sectioning the surface of the garment into grids with 6 cm intervals in the front and back of the bodice. In order to determine the optimal locations of the ECG electrodes from the 56 positions, ECG measurements were collected from 10 participants at every electrode position in the garment while the wearer was in motion. The electrode locations indicating both an ECG measurement rate higher than 80.0 % and a large amplitude during motion were selected as the optimal electrode locations. The results of this analysis show four electrode locations with consistently higher ECG measurement rates and larger amplitudes amongst the 56 locations. These four locations were abstracted to be least affected by wearer movement in this research. Based on this result, a design of the garment-formed ECG monitoring platform reflecting the optimal positions of the electrode was suggested.

The Electrodes Shirt Design for ECG Imaging

Evaluation Of Non-Contact Flexible Electrodes Connected With A Customized Ic -Steps Towards A Fully Integrated Ecg Sensor

PEDOT:PSS Hydrogel based Flexible Electrodes for Wearable ECG Monitoring

Characterization of Dry Biopotential Electrodes

Applying Noncontact Sensing Technology in the Customized Product Design of Smart Clothes Based on Anthropometry

Design and Application of A Wearable Circuit for ECG Signal Collection Based on Impedance Transformation Textile Electrodes

An Integrated Design of Multi-Channel ECG Sensor on Smart Garment

Design of a smart ECG garment based on conductive textile electrode and flexible printed circuit board.

A Study on the Optimal Positions of ECG Electrodes in a Garment for the Design of ECG-Monitoring Clothing for Male

Design of 12-Lead Electrocardiogram Smart Clothing Based on Capacitive Sensing Technique

Flexible Non-Contact Electrodes for Minimizing Artifacts in Electrocardiograms Measurement During Motion

Low-Contact Impedance Textile Electrode for Real-Time Detection of ECG Signals

Wearable Measurement of ECG Signals Based on Smart Clothing

3D E-textile for Exercise Physiology and Clinical Maternal Health Monitoring

Washable and Reliable Textile Electrodes Embedded into Underwear Fabric for Electrocardiography (ECG) Monitoring

Textile Electrodes for Electrocardiogram Monitoring

Comparative Study on Conductive Knitted Fabric Electrodes for Long-Term Electrocardiography Monitoring: Silver-Plated and PEDOT:PSS Coated Fabrics

Design, Fabrication, and Evaluation of 3D Biopotential Electrodes and Intelligent Garment System for Sports Monitoring

Performance Evaluation of Woven Conductive Dry Textile Electrodes for Continuous ECG Signals Acquisition

[Design and Implementation of Hand-Held Electrocardiogram Monitor].

Design of a Wearable 12-Lead Noncontact Electrocardiogram Monitoring System