Abstract:Purpose In recent years, owing to the rapidly increasing labor costs, the demand for robots in daily services and industrial operations has been increased significantly. For further applications and human–robot interaction in an unstructured open environment, fast and accurate tracking and strong disturbance rejection ability are required. However, utilizing a conventional controller can make it difficult for the robot to meet these demands, and when a robot is required to perform at a high-speed and large range of motion, conventional controllers may not perform effectively or even lead to the instability. Design/methodology/approach The main idea is to develop the control law by combining the SMC feedback with the ADRC control architecture to improve the robustness and control quality of a conventional SMC controller. The problem is formulated and solved in the framework of ADRC. For better estimation and control performance, a generalized proportional integral observer (GPIO) technique is employed to estimate and compensate for unmodeled dynamics and other unknown time-varying disturbances. And benefiting from the usage of GPIO, a new SMC law can be designed by synthesizing the estimation and its history. Findings The employed methodology introduced a significant improvement in handling the uncertainties of the system parameters without compromising the nominal system control quality and intuitiveness of the conventional ADRC design. First, the proposed method combines the advantages of the ADRC and SMC method, which achieved the best tracking performance among these controllers. Second, the proposed controller is sufficiently robust to various disturbances and results in smaller tracking errors. Third, the proposed control method is insensitive to control parameters which indicates a good application potential. Originality/value High-performance robot tracking control is the basis for further robot applications in open environments and human–robot interfaces, which require high tracking accuracy and strong disturbance rejection. However, both the varied dynamics of the system and rapidly changing nonlinear coupling characteristic significantly increase the control difficulty. The proposed method gives a new replacement of PID controller in robot systems, which does not require an accurate dynamic system model, is insensitive to control parameters and can perform promisingly for response rapidity and steady-state accuracy, as well as in the presence of strong unknown disturbances.

Ring-pendulum Double-sided Polisher with Improved Super Twisting Sliding Mode Active Disturbance Rejection Control

Improved 2-Order Active Disturbance Rejection Control for PMSM

Simple Multi-Pd Control Algorithm of Double Inverted Pendulum

A Fast Integral Sliding Mode Controller with an Extended State Observer for Position Control of Permanent Magnet Synchronous Motor Servo Systems

A Polishing Processes Optimization Method for Ring-Pendulum Double-Sided Polisher

Permanent Magnet Synchronous Motor Control System Based on No Manual Tuned Active Disturbance Rejection Control

Active disturbance rejection sliding mode control for robot manipulation

ADRC Control System of PMLSM Based on Novel Non-Singular Terminal Sliding Mode Observer

A Fractional-Order ADRC Architecture for a PMSM Position Servo System with Improved Disturbance Rejection

Improved current control for PMSM via an active disturbance rejection controller

Speed-current composite loop SPMSM control based on ADR-SMC

Predictive Active Disturbance Rejection Control for Servo Systems With Communication Delays Via Sliding Mode Approach

Disturbance Suppression of Gimbal Servo Motor Based on Improved ADRC and ISMC Method

Speed‐sensorless control for SPMSM via novel exponential super‐twisting ADRC

Improved Active Disturbance Rejection Double Closed-Loop Control of a Rotary-Type VCM in a Moving Mirror Control System

Composite Super-Twisting Sliding Mode Control Design for PMSM Speed Regulation Problem Based on a Novel Disturbance Observer

Linear active disturbance rejection speed control with variable gain load torque sliding mode observer for IPMSMs

Application of Active Disturbance Rejection to Tracking Control of A Fast Tool Servo System

Linear-Nonlinear Switching Active Disturbance Rejection Speed Controller for Permanent Magnet Synchronous Motors

Improved Model-Free Continuous Super-Twisting Non-Singular Fast Terminal Sliding Mode Control of IPMSM

Super Twisting-Based Position Control of PMLSM with Load Force Observer