Abstract:Electrospinning is a simple, versatile technique for fabricating fibrous nanomaterials with the desirable features of extremely high porosities and large surface areas. Using emulsion electrospinning, polytetrafluoroethylene/polyethene oxide (PTFE/PEO) membranes were fabricated, followed by a sintering process to obtain pure PTFE fibrous membranes, which were further utilized against a polyamide 6 (PA6) membrane for vertical contact-mode triboelectric nanogenerators (TENGs). Electrostatic force microscopy (EFM) measurements of the sintered electrospun PTFE membranes revealed the presence of both positive and negative surface charges owing to the transfer of positive charge from PEO which was further corroborated by FTIR measurements. To enhance the ensuing triboelectric surface charge, a facile negative charge-injection process was carried out onto the electrospun (ES) PTFE subsequently. The fabricated TENG gave a stabilized peak-to-peak open-circuit voltage (V-oc) of up to similar to 900 V, a short-circuit current density (J(sc)) of similar to 20 mA m(-2), and a corresponding charge density of similar to 149 mu C m(-2), which are similar to 12, 14, and 11 times higher than the corresponding values prior to the ion-injection treatment. This increase in the surface charge density is caused by the inversion of positive surface charges with the simultaneous increase in the negative surface charge on the PTFE surface, which was confirmed by using EFM measurements. The negative charge injection led to an enhanced power output density of similar to 9 W m(-2) with high stability as confirmed from the continuous operation of the ion-injected PTFE/PA6 TENG for 30 000 operation cycles, without any significant reduction in the output. The work thus introduces a relatively simple, cost-effective, and environmentally friendly technique for fabricating fibrous fluoropolymer polymer membranes with high thermal/chemical resistance in TENG field and a direct ion-injection method which is able to dramatically improve the surface negative charge density of the PTFE fibrous membranes.

MXene Effectively Enhances the Electron-Withdrawing (EW) Ability and Dielectric Properties of PVDF-TrFE Nanofibers for Triboelectric Nanogenerators

MXene based mechanically and electrically enhanced film for triboelectric nanogenerator

Alternate-Layered MXene Composite Film-Based Triboelectric Nanogenerator with Enhanced Electrical Performance

All-electrospun Flexible Triboelectric Nanogenerator Based on Metallic MXene Nanosheets

Mechanically and Electrically Robust, Electro-Spun PVDF/PMMA Blend Films for Durable Triboelectric Nanogenerators

Understanding the Percolation Effect in Triboelectric Nanogenerator with Conductive Intermediate Layer

Excellent triboelectric properties of P(VDF-TrFE) nanofibers incorporated with Bi-based oxide-modified KNN polycrystals

Enhanced Triboelectric Output of PDMS-based Composite Film with Bi-Material Filling and Surface Patterning

MXene-functionalized KNN dielectric nanofillers incorporated in PVA nanofibers for high-performance triboelectric nanogenerator

Exfoliating Ti3AlC2 MAX into Ti3C2Tz MXene: A Powerful Strategy to Enhance High‐Voltage Dielectric Performance of Percolation‐Based PVDF Nanodielectrics

Silane-Modified MXene/PVA Hydrogel for Enhanced Streaming Vibration Potential in High-Performance Flexible Triboelectric Nanogenerators

High-performance Triboelectric Nanogenerator Based on Electrospun PVDF-graphene Nanosheet Composite Nanofibers for Energy Harvesting

Comprehensive Insights on MXene‐Based TENGs: from Structures, Functions to Applications

High-Performance Yet Sustainable Triboelectric Nanogenerator Based on Sulfur-Rich Polymer Composite with MXene Segregated Structure

(Digital Presentation) Enhanced Streaming Vibration Potential By Silane-Modificated Mxene/PVA Hydrogel for High-Performance Flexible Triboelectric Nanogenerator

MOF-derived NiO/N-MWCNTs@PVDF film and MXene/Carbon/Ecoflex electrode for enhanced hybrid nanogenerator towards environmental monitoring

High Performance Porous Triboelectric Nanogenerator Based on Silk Fibroin@MXene Composite Aerogel and PDMS Sponge

Emulsion Electrospinning of Polytetrafluoroethylene (PTFE) Nanofibrous Membranes for High-Performance Triboelectric Nanogenerators.

Multifunctional 3D-Mxene/pdms Nanocomposites for Electrical, Thermal and Triboelectric Applications

Quenched PVDF/PMMA Porous Matrix for Triboelectric Energy Harvesting and Sensing

Electron trapping & blocking effect enabled by MXene/TiO2 intermediate layer for charge regulation of triboelectric nanogenerators