Abstract:To study the influences of the cross-sectional shapes on the final depths of penetration, a series of experiments were carried out on the penetration of long-rod projectiles with the same cross-sectional area different cross-sectional shapes into semi-infinite metal targets. The cross-sectional shapes were machined to be circular, square and cross, respectively. These experiments were divided into two groups. In one group of experiments, the long-rod projectiles with the aspect ratio of 8 and 93W alloy cores penetrated into armor-steel target plates. In another group of experiments, the long-rod projectiles with the aspect ratio of 15 and 45 steel cores penetrated into the 45 steel target plates. Depths of penetration under different impact velocities were experimentally obtained for different cross-sectional shapes, aspect ratios, and materials of projectiles and targets, respectively. Experimental results display that the penetration abilities of the three kinds of long-rod projectiles with non-circular cross-section are higher than that of the long-rod projectiles with circular cross-section under the same working conditions. And among the four kinds of long-rod projectiles, the penetration ability of the long-rod projectiles with cross section is the highest, followed by that of the long-rod projectiles with square section. With the increase of the impact velocity, the penetration gains of the cross and square cross-section long-rod projectiles to the circular cross-section ones increase. The cross-section shape of craters penetrated by the triangular cross-section long-rod projectiles takes on arc triangle, and the cross-section shape of craters penetrated by the long-rod projectiles with square and cross sections, respectively, takes on approximate circle. After penetration of the three kinds of non-circular cross-section long-rod projectiles, cracks at certain angles with the axial direction appear in the mushroomed heads of the projectile bodies, which leading to less resistance encountered by the projectiles in the process of penetration. The reason, why the penetration abilities of three kinds of non-circular cross-section long-rod projectiles are higher than that of the circular-section long-rod projectiles, is their structural self-sharpening in the process of penetration.

Study of the Axial Density/impedance Gradient Composite Long Rod Hypervelocity Penetration into a Four-Layer Q345 Target

Strain-rate-dependent Cohesive Zone Modelling of Charge Damage Behavior when a Projectile Penetrates Multilayered Targets

Study on fuze overload characteristic of high speed rocket in penetration process

Experiment Research and Crater Analysis of Long Rodhypervelocity Penetration into Concrete

Hypervelocity penetration of concrete targets with long-rod steel projectiles: experimental and theoretical analysis

Flow Field Analysis of Long Rod Hypervelocity Penetration into Semi-Infinite Concrete Target

Experimental Study on Penetration of Non-Circular Cross-Section Long-Rod Projectiles into Semi-Infinite Metal Target

Numerical Simulation of the Effect of Projectile Shape and Size on the High-Velocity Impact of Carbon Fiber Reinforced Composite Laminates

Investigation on the penetration of jacketed rods with striking velocities of 0.9–3.3 km/s into semi-infinite targets

Numerical Simulation Research on Steel/ceramic Composite Target Plate Structure Against Penetration of High-Speed Projectile

Experimental research on the mechanism of a high-velocity projectile penetrating into a reinforced concrete target

Numerical Study on Penetration Performance of Low-velocity Flat-nose Projectile into Two-Laminated Target

High-velocity Penetration of Concrete Targets with Three Types of Projectiles: Experiments and Analysis

Investigation on the influence of strength and density of jacket materials on the penetration performance of jacketed rods

Influence of the cross-section shapes of long rod projectile on the vertical penetration depth

Numerical Simulation of Multifunctional Projectile Penetrating Reinforced Concrete Target Plate Based on Sensor Data Acquisition

Investigation into Damage Characteristics and Ballistic Performance of In-Contact Multi-Layer Steel Targets Subjected to High-Velocity Impact by Explosively Formed Projectiles

Numerical Simulation on Shaped Charge Jet Penetrating Single / Composite Structure of Target Plate

Experimental Studies on Kinetic Projectile's Direct Penetrations with Low-speed Against Reinforced Concrete Targets

Effects of Different Elastic Number and Thickness Ratios on Damage Mechanism of Aramid /UHMWPE Composite Target Plate

Oblique Penetration of Tungsten Alloy Rod to Finite-Thickness Metal Plate