Abstract:Flexible piezoelectric functional composite materials have the advantages of strong plasticity and good surface adhesion, and show great potential in smart wearable devices, electronic skin and other applications. However, due to the complexity of traditional preparation process, high molding cost and poor air permeability, its further development is limited. Direct ink writing (DIW) 3D printing technology is a rapid prototyping technology, with higher flexibility, faster manufacturing speed and lower manufacturing costs, is widely used in metal, ceramic and composite material molding. In this work, a ink system with polydimethylsiloxane (PDMS) as binder and barium titanate (BTO) ceramic powder as piezoelectric filler was developed, the printing work of flexible porous BTO/PDMS composite material was completed. DIW dual-nozzle printing technology was applied to realise "electrode-piezoelectric-electrode" integrated flexible porous functional gradient structure composites in this study. The results show that the BTO/PDMS ink has the characteristics of shear thinning. When the nozzle diameter is 0.5 mm, the printing speed is 650 mm/min, and the BTO mass fraction is 80%, the flexible porous piezoelectric composite with high precision and complex structure is printed. By phase analysis of BTO/PDMS, it is found that the sample has the characteristic peak of BTO. The microstructure analysis shows that the surface of the sample has good structural fidelity and there are a few island-like pores in the interior. The mechanical test shows that the maximum tensile strength of the sample is 1.33 MPa, the elastic modulus is 1.72 MPa, the longitudinal piezoelectric coefficient d 33 is 4.37 Pc/N, and the open circuit voltage VOC is 3.17 V. This work demonstrates an attractive method of moulding flexible piezoelectric materials with an "electrode-piezoelectric-electrode" structure, which provides a reference to current 3D printing flexible material fabrication techniques due to its simplicity of operation, time and manufacturing cost savings.

Direct 3D Printing of Piezoelectrets: Process Feasibility, Prototypes Fabrication and Device Performance

3D Printing of Flexible Piezoelectric Composite with Integrated Sensing and Actuation Applications

An Electro-Mechanical Coupled Model for 3D Printed Piezoelectrets: Development, Validation, and Prediction

3D Printed Piezoelectric‐Regulable Cells with Customized Electromechanical Response Distribution for Intelligent Sensing

3D-Printed Piezoelectret Based on Foamed Polylactic Acid for Energy-Harvesting and Sensing Applications

Study on the control of mechanical and electrical properties of 3d printed BTO/PDMS flexible porous composites

Direct ink writing of 3D piezoelectric ceramics with complex unsupported structures

Optimization of Piezoresistive Response of Elastomeric Porous Structures Based on Carbon-Based Hybrid Fillers Created by Selective Laser Sintering

Customizing Three-Dimensional Elastic Barium Titanate Sponge for Intelligent Piezoelectric Sensing

Design, Fabrication, Structure Optimization and Pressure Sensing Demonstration of COC Piezoelectret Sensor and Sensor Array

3D Printing of Piezoelectric Element for Energy Focusing and Ultrasonic Sensing

Piezoelectric ceramics with hierarchical macro- and micro-pore channels for sensing applications

Porosity manipulation to boost piezoelectric output via supercritical carbon dioxide foaming and surface modification

3D Printing Architecting Β-Pvdf Reservoirs for Preferential ZnO Epitaxial Growth Toward Advanced Piezoelectric Energy Harvesting

Optimization of Polarization Direction on 3D Printed 3-3 Piezoelectric Composites for Sensing Application

Coupling Selective Laser Sintering and Supercritical CO2 Foaming for 3D Printed Porous Polyvinylidene Fluoride with Improved Piezoelectric Performance

Boosting Piezoelectricity by 3D Printing PVDF‐MoS2 Composite as a Conformal and High‐Sensitivity Piezoelectric Sensor

3D-Printing Piezoelectric Composite with Honeycomb Structure for Ultrasonic Devices

Three-dimensional printing of piezoelectric materials with designed anisotropy and directional response

Three-dimensional piezoelectric polymer microsystems for vibrational energy harvesting, robotic interfaces and biomedical implants