Abstract:Low-frequency noise has always been a thorny problem in the field of noise control. In recent years, the development of sound-absorbing metastructures has provided new ideas for low-frequency noise control. In this paper, we propose low-frequency sound-absorbing metastructures constructed by Helmholtz resonators with embedded slit. Analytical and numerical models were established to analyze the sound absorption performance and mechanism of the proposed sound-absorbing metastructure, and optimization design was conducted to achieve low-frequency wideband absorption performance. The analytical modeling method and the performance of the proposed sound-absorbing metastructure were also experimentally verified. The main conclusions are summarized as follows: 1) Based on the use of transfer matrix method and finite element method, analytical and numerical models for calculation of sound absorption coefficient were established. It was shown that analytical predictions are in good agreement with numerical calculations. It was demonstrated that a typical design of a single-cell metastructure with 30mm thickness can achieve a sound absorption coefficient of 0.88 at 404 Hz. Typical designs of two-cell and the four-cell parallel structures (with 50 mm thickness) can achieve two and four near-perfect low-frequency sound absorption peaks within the frequency band of 200-400 Hz, respectively. 2) The low-frequency sound absorption mechanisms of the proposed metastructure were explained from four aspects: simplified equivalent model parameters, normalized acoustic impedance, complex-plane zero/pole distribution, sound pressure cloud image and particle velocity field distribution. It was demonstrated that the main sound absorption mechanism is associated with the thermal viscous loss of sound waves caused the inner wall of embedded slit. 3) Optimization design for broadband low-frequency absorption performance was carried out by using differential evolution optimization algorithm. A parallel-multi-cell coupled metastructure with multiple perfect sound absorption peaks below 500Hz was optimized. Under the condition of thickness 90mm, the sound absorption coefficient curve of an optimized metastructure exhibited 8 near-perfect sound absorption peaks and an average sound absorption coefficient of 0.86 within the frequency range of 170-380 Hz. 4) Experimental samples were fabricated to carry out sound absorption tests. Experimental results were basically consistent with the analytical predictions. Mutual verification of analytical model, numerical calculation and experimental measurements was completed. To sum up, the sound-absorbing metastructures proposed in this paper have outstanding sound absorption performance at low frequencies with sub-wavelength thickness. We demonstrated they are suitable for low frequency broadband sound absorption below 500 Hz. Thanks to their thin thickness and relatively simple construction, they have broad application prospects in practical noise control engineering.

A Modified Sonic Black Hole Structure for Improving and Broadening Sound Absorption

Sound absorber based on a sonic black hole and multi-layer micro-perforated panels

Design, analysis, and experimental validation of a sonic black hole structure for near-perfect broadband sound absorption

A broadband and low-frequency sound absorber of sonic black holes with multi-layered micro-perforated panels

Enhanced sound absorption with the combined sonic black holes

Broadband sound absorption using acoustic black holes with micro-perforated panels

A composite acoustic black hole for ultra-low-frequency and ultra-broad-band sound wave control

Broaden the sound absorption band by using micro-perforated plate back cavities with different cross-sectional areas

An extra-broadband compact sound-absorbing structure composing of double-layer resonator with multiple perforations.

Development of a low-frequency broadband sound absorber based on a micro-perforated panel coupled with the Helmholtz resonator system

Rectangular extended neck Helmholtz resonant acoustic structure for low frequency broadband sound absorption

Acoustic Metamaterial Composed of Zigzag Channel and Micro-Perforated Plate for Enhanced Low-Frequency Sound Absorption

Broadening efficient sound absorption bandwidth of spatial bending acoustic metasurfaces with multi-parameter variation

Design and Optimization of One Special Microperforated Plate-Labyrinth Coupled Structure (MPPS-LS): From the View of Numerical Simulation

Low-frequency broadband sound absorption of the metastructure with extended tube resonators and porous materials

Mechanism analysis and optimal design of sound-absorbing metastructure constructed by slit-embedded Helmholtz resonators

Design of an adjustable sound-absorbing structure with low frequency advantages

Broadband high-efficiency meta-structures design by acoustic critical absorption effect

Multilayer structures for high-intensity sound energy absorption in low-frequency range

Broadband Thin Sound Absorber Based on Hybrid Labyrinthine Metastructures with Optimally Designed Parameters

Multimodal Local Resonators for Low-Frequency Amelioration of Acoustic Black Holes