Abstract:In areas where thermal and nuclear power plants are mainly located, the problem of lack of maneuverable capacities, the coverage of peak loads and the passage of periods of reduced energy consumption is solved through the construction of large pumped storage power plants (PSPP). To create highly efficient flow paths for pump-turbines, one of the modern trends is the use of numerical modeling of three-dimensional fluid flow. Nowadays, there are many software products that implement numerical modeling by the finite volume method. The most famous among them are Fluent, CFX, StarCD, Numeca, Flow Vision and CADRUN. Verification of the computational model remains an urgent task. It is important to choose a methodology that will allow you to get an acceptable result with optimal time spent on preparing data and conducting computational studies. The article examines the flow path of a radial-axial pump-turbine designed for use at a maximum head up to 250m. Numerical modeling of the cavitation process arising in the turbine mode at a significant distance from the optimum of the characteristic was carried out. The calculations were performed using the Ansys CFX software package, version 2021R1. A brief description of the problem statement, the computational grids used and the assumptions made is given. Comparison of calculation results with experimental data is presented. A qualitative comparison of the cavitation origination regions obtained by numerical simulation with the data of monitoring the state of the base metal and welded joints of the hydroelectric unit impeller by the method of non-destructive testing is carried out. The aim of the work was to present an economical technique for numerical simulation of cavitation to determine the places of possible occurrence of cavitation wear. The technique consists in describing the formulation of the problem, the computational grids used and the assumptions made for the optimal use of computing resources without a significant loss in the accuracy of the results.

Numerical Simulation of Centrifugal Pump Cavitation Based on ANSYS

Numerical Simulation of Cavitating Flow in Water Hydraulic Axial Piston Pump

Numerical Simulation of the Cavitation Characteristics of A Mixed-Flow Pump

Performance Prediction of Centrifugal Pump Based on the Method of Numerical Simulation

Numerical Simulation and Analysis of Cavitation Flows in a Double Suction Centrifugal Pump

Numerical Study of the Hydrodynamics of an External Gear Pump

Numerical Research on the Cavitation Characteristics for Typical Conditions of A Centrifugal Pump with Whole Flow Passage

Experiment and Numerical Simulation of Cavitation Performance for a Double Suction Centrifugal Pump

Cavitation Performance Improvement of High Specific Speed Mixed-Flow Pump

Numerical Simulation on Internal Flow in the Screw Centrifugal Pulp Pump

Numerical Prediction of Hydrodynamic Performance of Centrifugal Pump under Attached Cavitating Flows

Research on Improving Cavitation Performance and Based on CFD of Centrifugal Pump

Numerical Simulation and Analysis of Unsteady Flow Characteristics in Centrifugal Pump Volute

Numerical investigations on effects of cavitation number on hydrodynamic performance of centrifugal pump

Numerical Simulation and Analysis on Hydraulic Performance in Vertical Canned Motor Pump

Numerical Prediction Of The Hydrodynamic Performance Of A Centrifugal Pump In Cavitating Flows

Numerical calculation and optimization designs in engine cooling water pump

Massively Parallel Simulation of the Characteristics of Cavitation Flow in a Centrifugal Pump Impeller

Numerical Prediction of Performance Drop Due to Cavitation in a Centrifugal Pump

Numerical simulation of cavitation in the flow path of a reversible hydraulic machine for a head up to 250m

Numerical Analysis on the Characteristics of Cavitation in the Variable Frequency Regulation of Centrifugal Pump