Abstract:Polymer grouting materials are increasingly used in the filling of mine fissures. Unlike conventional inorganic grouting materials, the self-expansion of polymers adds complexity to their diffusion process within the crack. The objective of this research was to examine how polymer grouting material spreads in cracks at ambient temperatures and pressure. The investigation involved conducting grouting tests and performing numerical fluid simulation calculations using the finite-volume method in the computational fluid dynamics software, ANSYS FLUENT 2022 R1. The fluid volume approach was employed to determine the boundary between fluid and air and to ascertain the variation patterns of density in the slurry and the fracture system. This study applied the principles of fluid mechanics to investigate the patterns of variation in the physical characteristics of polymer grouting materials, including their density, pressure, flow velocity, and movement distance, during the diffusion process. The results indicated that the density of the polymer grouting material decreased exponentially over time throughout the diffusion process. With the increase in the grouting's volume, the grout's pressure and the permeable distance of the grout increased. The slurry's pressure near the grouting hole exceeded the other points' pressure. The physical parameters of the slurry were numerically simulated by ANSYS FLUENT 2022 R1 software, and the results were compared with the experimental data. After comparing the numerical simulation results with the test data, it was clear that the numerical simulation method was superior in accurately predicting the distribution pattern of each parameter of the polymer slurry during diffusion. The grouting volume, pressure distribution, and real-time change in the position of the flow of slurry could be efficiently determined through numerical calculation and simulated grouting tests. This work can offer valuable information for designing polymer grouting materials used in underground mine fissures.

Experimental and Numerical Studies of Self-Expansible Polyurethane Slurry Diffusion Behavior in a Fracture Considering the Slurry Temperature

Numerical Investigation of Grout Diffusion Accounting for the Dynamic Pressure Boundary Condition and Spatiotemporal Variation in Slurry Viscosity

Numerical Manifold Simulation and Medium-Parameter Analysis of the Polymer Grouting Process in Three-Dimensional Rock Fractures

Study on the Diffusion Characteristics of Polymer Grouting Materials Applied for Crack Filling in Underground Mines Based on Numerical Simulation and Experimental Methods

Propagation Analysis of Polymer Grout in Vertical Fractures: An Experimental and Numerical Study

Study on Ratio Optimization and Diffusion-Gelation Process of Polymer Grouting Materials for Fracture Filling in Underground Mines

Numerical and Experimental Research on Diffusion Characteristic of Polymer Slurry in Narrow Slot at Constant Pressure

Numerical Study on Seepage of Chemical Grout Flow in Rock Fracture under Temperature Field

Experimental Investigation and Numerical Verification on Diffusion of Permeable Polymers in Sandy Soils with Considering Grouting Parameters

Experimental Study on the Diffusion Characteristics of Nonaqueous Reactive Expansive Polymers in Sand and Gravel Media under Dynamic Water Conditions

Experimental Study on the Influence of Temperature and Humidity on the Fracture Properties of Polyurethane Grouting Materials

Experimental study on grouting of elliptical fractured rock mass at various temperatures

Numerical Simulation of Slurry Diffusion in Fractured Rocks Considering a Time-Varying Viscosity

Experimental Study on Flow Water Diffusion of Cement-Sodium Silicate Grouting in Rough Fracture Model

Research on slurry diffusion and seepage law in mining overburden fractures based on CFD numerical method

Experimental Investigation on the Grouting Diffusion Characteristics and Relative Filling Degree of Chemical Slurry in Fractured Porous Sandstone

Experimental Study on Reducing the Heat of Curing Reaction of Polyurethane Polymer Grouting Material

Research on the Rheological Properties and Diffusion Law of Coal-Based Solid Waste Geopolymer Grouting Material

Volume of Fluid Method Based Finite Element Analysis of Fracture Grouting

Study on Creep Mechanical Properties of Non-Water Reacting Polyurethane Grouting Material

Development of Grouting Test System for Rough Fissure Rock Body and Research on Slurry Diffusion Law