Design and experiment on seed flow sensing device for rapeseed precision metering device
Ding Youchun,Yang Junqiang,Zhu Kai,Zhang Lili,Zhou Yawen,Liao Qingxi
DOI: https://doi.org/10.11975/j.issn.1002-6819.2017.09.004
2017-01-01
Abstract:Precision seeding plays an important role in intelligent agricultural machinery development due to its advantages of saving seeds, reducing labor intensity, improving operation efficiency and increasing farmers' income. In the planting process, seed metering device is in a closed status and sowing quantity affects crop yield directly, and thus sowing quantity monitoring become one of the development trends in intelligent precision seeding. In recent years, various methods for precision seeding such as photoelectric sensor detection, high-speed photography, and capacitance sensing have been proposed to improve seeding performance for the corn, rice, soybean and other large seeds. Few studies have focused on the sensing method of small seeds such as rapeseed because of its small size, light weight and high frequency seeding. Thus, the development and application of monitoring technology about precision sowing for small seeds are limited. In this study, a seed flow sensing device for rapeseed precision metering device was designed and tested. Specifically, collision trajectory between rapeseed and PVDF (polyvinylidene fluoride) piezoelectric film was recorded and analyzed using high-speed photography and collision dynamics. These data provided a quantitative reference for the design of key structures in terms of the height of catheter, sloping angle of piezoelectric film, position of seed-output, etc. The sensing structure of sinking groove substrate and piezoelectric film was designed based on the analysis of characteristics of impact signal between rapeseed and piezoelectric film. The structure could limit the free oscillation amplitude of the piezoelectric film that could weaken the peak voltage of the free oscillation effectively. The decay time of impact signal was reduced from 9 to 1 ms, which improved the time resolution for high frequency seed flow detection and effectively eliminated the interference caused by mechanical vibration. The signal conditioning circuit turned weak signal into single pulse signal by signal amplification, half wave rectification, voltage comparison, and mono-stable triggering. Then, the real-time detection of seeding frequency and seeding quantity of rapeseed flow was obtained through the timing and counting function of the MCU (STC12C2052AD). Finally, these data were transmitted at a fixed time interval (1 s) by 2.4 GHz wireless transmission module to the monitoring display terminal, and the real-time display and storage of detection data (including the seeding frequency and the total seeding amount) were realized. Bench experiment consisted of two tests. One was carried out on the pneumatic precision metering device for rapeseed bench test. During the test, a seeding plate (40 holes) was set at a suitable speed such as 12, 18, and 24 r/min (seeding frequency was 8, 12, and 16 Hz), and the sensing device was installed under the metering device. After a period of seeding time, the detection seeding quantity, seeding time and actual seeding quantity were recorded by observing monitoring display terminal and by manual counting the seeds in the seeds collecting bag. Another test about high-rate seeding was carried out using microcomputer automatic counting instrument. During the test, seeding frequency was set as about 20, 24, 28, and 32 Hz, respectively by adjusting the vibration level, and then the detection of seeding quantity, the seeding time and the actual seeding quantity were obtained using a similar method of the first test. Tests of rapeseed precision metering device bench and high-rate seeding with counting instrument showed that the detection accuracy was not less than 99.5% by comparing detection seeding quantity and actual seeding quantity in the seeding frequency ranging from 8.1 to 32.9 Hz. In addition, the field experiment was carried out on precision joint planter of 2BYM8 for rapeseed driven by a LOVOL M704-BA tractor. The results indicated that the sensing device based on the composite sensing structure of sinking groove substrate and piezoelectric film sensing composite structure can detect the seed flow seeding frequency and seeding quantity, with the counting number being zero without seeding and the detection accuracy being not less than 99.1% under normal seeding. Besides, the mechanical vibration and dust had no effect on the sensing device. The piezoelectric rapeseed flow sensing device presented may facilitate metering quantity monitoring, loss sowing detection and reseeding.