Mechanism and experimental study of surface hydrophobic modification promoting settlement of coal measure clay minerals

GUO Yueting,LI Zhihong,LIU Airong,XUE Zhonghua,YANG Hongli,GAO Jianchuan,HAO Bo

DOI: https://doi.org/10.19726/j.cnki.ebcc.202303010

2023-01-01

Abstract:In response to the current situation of difficulty in settling of coal slime with high-mud content in coal preparation plants, this study explored the settling behavior of coal series clay minerals using a combination of flocculant polyacrylamide（PAM） with dodecyltrimethylammonium bromide（DTAB） and hexadecyltrimethylammonium bromide（CTAB）. The clay mineral settling mechanism was semi-quantitatively analyzed through various techniques such as agglomeration image observation, XPS analysis, measurement of wetting heat and contact angle, and Zeta potential testing. The results show that the addition of DTAB and CTAB can promote the clay mineral particles formation of large clay particle aggregates, thus increasing the clay mineral particles settling velocity and considerably reducing the supernatant turbidity. Besides, CTAB is found to be more effective than DTAB. When the dosage of CTAB is 1 800 g/t, and the dosage of PAM is 80 g/t, the settling effect is better, with an initial settling velocity of clay mineral particles is 43.32 m/h, a turbidity value of 76 NTU, a sediment height of 19 mm, and the maximum aggregate diameter is about 2.6 mm. XPS and surface wettability test results show that cationic surfactants interact with the mineral surface, with hydrophilic groups facing towards the particle surface, reducing the negative surface potential of the particles through “electro-neutrality” effects, resulting in the reduction of the electrostatic repulsion between the mineral particles. Meanwhile, the active agent hydrophobic groups detach from the mineral particle surface, covering the oxygen-containing groups and increasing the content of carbon-containing groups on the mineral particles surface, thereby reducing the absolute value of the wetting heat on the mineral particle surface, increasing the contact angle, changing the surface hydrophobicity of the mineral, promoting the hydrophobic polymerization of the mineral particles, and facilitating their aggregation and settling. Compared with DTAB, CTAB has a longer alkyl chain and stronger ability to modify the mineral particles surface hydrophobicity of the mineral, resulting in a better settling effect for clay minerals.