Abstract:In a low-temperature environment, the actuation performance of the piezoelectric stack results from the synergic action of the thermo-electro-mechanical field; the actuation performance is influenced by the change in temperature, compressive preload, and excitation voltage. A special and novel instrumentation system is proposed and developed in this study to measure the relationship between the actuation performance of the piezoelectric stack and the change in temperature, preload, and voltage. The bending strain of the cantilever beam driven by the piezoelectric stack reflects its actuation performance, and the corresponding theoretical model is established to optimize the experimental conditions and maximize the strain and signal-to-noise ratio. Based on the experimental results, it can be seen that the actuation performance of the piezoelectric stack increases linearly with the excitation voltage under different temperatures and preload conditions. The static actuation performance increased by 79%-90% when the prestress increased from 0 to 6 MPa, corresponding to a decrease of 15%-30% when the temperature decreased from 20 to -70 °C, and the dynamic actuation performance decreased with an increase in the frequency of the excitation voltage. Consequently, the design methods and ideas are informative to develop an instrumentation system that can measure the influence of thermo-electro-mechanical synergistic effects on the actuation performance of piezoelectric stacks under different temperatures, preloads, and voltages.

Dynamic Investigation on Effective Bulk Modulus of Hydraulic Oil Using Piezoelectric Transducers

Method and Experiment for Increasing Effective Fluid Bulk Modulus in Hydraulic Systems

Control of Bulk Modulus of Oil in Hydraulic Systems

A Dynamic Piezoelectric Micropumping Phenomenon

Measurement of Effective Fluid Bulk Modulus in Hydraulic System

Structure Design and FEA Analysis of a Measuring Device for Hydraulic Oil Bulk Modulus

Research on Two Key Technologies of Improving Dynamic Quality of Hydraulic System with High Flow

Design and Simulation Study of a Vacuum-pumping Deaerating Device for Hydraulic Oil

Several key technologies of hydraulic system with high flow and high performance

Research on Dynamic Characteristics of Deep Sea Pressure Compensator

Determination Of Transient Dynamic Pressure By Piezoelectric Sensor

Investigations on Pulsation-Reduction Characteristics of Hydraulic Attenuator Based on Experimental Method

Analysis and Experimental Research on Efficiency Characteristics of a Deep-Sea Hydraulic Power Source

Piezoelectric Actuator and Its Application in Hydraulic Valves

Hydrodynamic Force Characterization and Experiments of Underwater Piezoelectric Flexible Structure

Design and Implementation of Testing Device for Damping Oil Bulk Modulus and Fatigue Characteristic

Investigation on the design of hydraulic high-speed punching press with a large press force and a long press stroke

Thermo-electro-mechanical Synergistic Effect on the Actuation Performance of Piezoelectric Stack

Investigation on a novel bellows-type piezo-hydraulic actuator

Experimental Study on Natural Vibration Frequency Identification of Hydraulic Concrete Structure Using Concrete Piezoceramic Smart Module

Numerical Analysis and Experimental Investigation of a Piezoelectric-Hydraulic Hybrid Actuator With Two Thin Plate Resonators