Abstract:Current research in hypersonic wind tunnel aerodynamic testing predominantly focuses on small-scale and lightweight models, typically limited to scales of 4 m and weights under 1 ton. However, there's an emerging trend in the design of hypersonic vehicles towards larger scales and heavier loads, often surpassing 9 m in length and several tons in weight. This shift poses new challenges as there's a noticeable gap in research specifically addressing the aerodynamic testing needs of these larger-scale models. Firstly, this study aims to fill this gap by conducting an exhaustive analysis of the impact of the strain box-balance floating frame on aerodynamic force transmission characteristics. This analysis is crucial as it offers essential theoretical guidance for designing large-scale strain box-balances in pulse combustion wind tunnels. These designs are uniquely tailored to test large and heavy air-breathing hypersonic vehicles (AHVs), addressing a critical need in the field. Subsequently, this study developed an innovative large-scale strain box-balance, measuring 2.4 m, specifically devised for aerodynamically testing extensive AHVs. Finally, to validate the effectiveness of this new strain box-balance design, the study undertook a series of comprehensive tests. These included static calibration tests, floating frame stiffness tests, and wind tunnel tests. The results from these experiments were remarkable, demonstrating high sensitivity across each test channel of the box-balance. Specifically, the sensitivities were 1.308 kg/10μv in the drag force test channel, 1.464 kg/10μv in the lift force test channel, and 1.104 kg/10μv in the pitching moment test channel. Additionally, the hysteresis levels recorded were exceptionally low, at 0.489 %, 0.0649 %, and 0.0086 % respectively for each channel. These findings not only validate the technical efficacy of the large-scale strain box-balance but also mark a significant stride in hypersonic aerodynamic research, catering to the emergent requirements of larger, heavier hypersonic vehicle models.

Wind Tunnel Test of Gust Load Alleviation for a Large-Scale Full Aircraft Model

Active Control and Wind Tunnel Test Verification of Multi-control Surfaces Wing for Gust Alleviation

Aero-Elastic Wind Tunnel Test of A High Lighting Pole

Gust Load Alleviation Control Strategies for Large Civil Aircraft through Wing Camber Technology

Design of an Adaptive Gust Response Alleviation Control System: Simulations and Experiments

Experimental mitigation of large-amplitude transverse gusts via closed-loop pitch control

Boosted Incremental Nonlinear Dynamic Inversion for Flexible Airplane Gust Load Alleviation

Performance evaluation of gust load alleviation systems for flexible aircraft via optimal control

A Reduced-Order-model-based Multiple-in Multiple-out Gust Alleviation Control Law Design Method in Transonic Flow

Dynamic and Elastic Response of Aircraft in Gust Loads

Short-time aerodynamic research for large scale test models in hypersonic wind tunnels

Real-Time Ground Aeroservoelastic Test for Slender Vehicles Based on Condensed Aerodynamic Force Loading

Computational Validation and Assessment of Large Amplitude Transverse Gust Physics

Development of a Novel Small-Scale Gust Generator Research Facility

Fluidic Flow Control Devices for Gust Load Alleviation

Gust Response of Spanwise Morphing Wing by Simulation and Wind Tunnel Testing

Dynamics, stability, and control of a four-cable mount system for wind tunnel test

Exploration of High-Frequency Actuation On Gust Response Using Large-Eddy Simulation

Computational-Fluid-Dynamics-Based Aeroservoelastic Analysis for Gust Load Alleviation

Design of Flight Control Law of Gust Alleviation for Flexible Aircraft

A multi-drive aerodynamic load simulator for floating wind turbine model tests: Development, test and application