Effect of Heat Treatment on the Corrosion Resistance of AlFeCoNiMo0.2 High-Entropy Alloy in NaCl and H2SO4 Solutions
Yuhan Peng,Ge Zhou,Jinke Han,Jianlin Li,Haoyu Zhang,Siqian Zhang,Li Lin,Lijia Chen,Xue Cao
DOI: https://doi.org/10.3390/met13050849
IF: 2.695
2023-04-27
Metals
Abstract:The effects of casting and different heat treatment processes on the corrosion resistance of AlFeCoNiMo0.2 high-entropy alloy in 3.5% NaCl (mass fraction) and 0.5 mol/L H2SO4 solutions were investigated using dynamic potential polarization curves, SEM, XRD, XPS, and other test methods. The results show that in the Cl− environment, the cast alloy has the lowest corrosion current density and higher corrosion resistance compared to the annealed alloy. The elements Al and Mo are severely segregated in the crystal and in the grain boundaries, where galvanic corrosion occurs, and the Al-rich phase produces pitting corrosion in the crystal. The main components of its passive film are oxides of Al, Fe, Co, and Mo, and oxides and hydroxides of Ni. In the SO42− environment, the best corrosion resistance is achieved in the 900 °C annealed state of the alloy. Electrochemical test results show that the alloys all undergo secondary passivation, producing two successive product films to protect the metal matrix. Preferential corrosion areas are concentrated in the molybdenum-rich grain boundaries and nearby dendritic regions, reducing the corrosion resistance of the alloy. The main components of the passive film are oxides of Al and Mo; oxides of Fe, Co, Ni; and hydroxides. The Mo element in the passive film prevents the activated dissolution of Fe and produces the protective component MoO3, which inhibits the dissolution of the alloy and improves the stability of the passive film. The presence of Mo elements increases the selective dissolution of Fe, and the aggregation of Mo elements at grain boundaries after annealing weakens the corrosion resistance of the alloy and leads to the dissolution of the passive film. The main components of the passive film are oxides of Al and Mo; oxides of Fe, Co, Ni; and hydroxides.
materials science, multidisciplinary,metallurgy & metallurgical engineering