Abstract:This paper studies control strategies for an AC/AC system based on a modular multilevel matrix converter (M3C) when an asymmetric fault occurs in the secondary side ac system. Firstly, the operating principle of M3C is briefly introduced and verified by simulation. Then, based on its mathematical model by double αβ0 transformation, the decoupled control strategies for the primary side and secondary side systems are designed. In view of the asymmetric fault condition of the secondary side system, the positive sequence and negative sequence components of voltages and currents are separated and extracted, and then a proportional resonant controller (PR) is used to regulate the positive and negative sequence currents at the same time to realize decoupled current control in the αβ reference frames. The capacitor voltage balancing control, which consists of an inter-subconverter balancing control and an inner-subconverter balancing control, is realized by adjusting four circulating currents. Finally, the proposed control strategy is validated by simulation in the PSCAD/EMTDC software (Manitoba HVDC Research Center, Canada). The result shows that during the period of the BC-phase short-circuit fault occurring in the secondary side system, the whole system can still operate stably and transmit a certain amount of active power, according to their set values. Furthermore, the capacitor voltages are balanced, with a slight increase during the fault period. The simulation results verify the effectiveness of the proposed control strategy.

A Novel Quasi‐hot Standby Fault‐tolerant Control Strategy for Cascaded H‐bridge Rectifier

Research on fault-tolerant control strategies of single-phase cascaded H-bridge rectifier

A Novel Method For Improving The Fault Tolerance Of Transformerless Cascade Pwm Statcom

Redundant Module Based Control Scheme for Grid-Forming Cascaded H-Bridge PV Converters to Enhance Overcurrent Capability

Fault-tolerant Design and Control of Modular Multilevel Converter-Based STATCOM

A novel fault-tolerant Shunt Active Power Filter and its control strategy

Modulation and Control of a New Alternate Arm Multilevel Converter for High-Voltage Direct Current System with Direct Current Fault Ride-Through Capability

Control Strategy for Fluctuating Voltage Generation in Cascaded H Bridge Converters

Research on an Asymmetric Fault Control Strategy for an AC/AC System Based on a Modular Multilevel Matrix Converter

A Fault-Tolerant Control Strategy for the Delta-Connected Cascaded Converter

Seamless self-healing control strategy for cascaded multilevel STATCOM

A Novel Fault-Tolerant Control Scheme for Shunt Active Power Filter with High Reliability

A Fault Tolerant Control Strategy for the Delta-Connected Cascaded Converter

Fault-Tolerant Design and Control Strategy for Cascaded H-Bridge Multilevel Converter-Based STATCOM

A Novel Recovery Strategy to Suppress Subsequent Commutation Failure in an LCC-Based HVDC

Fault-Tolerant Control Strategy of Single-Phase Cascaded DVR under Different Voltage Sag Depth

Optimal Control Strategy for Cascaded STATCOM under Unsymmetrical Power System Conditions

A New Recovery Strategy of HVDC System During AC Faults

A DC Bus Voltage Balancing Technique for the Cascaded H-Bridge STATCOM with Improved Reliability under Grid Faults

A Power Switch Open‐circuit Fault‐tolerant Scheme Using Dc Current Injection for Dual Active Bridge Converters in Cascaded H‐bridge Solid‐state Transformer

A General Decentralized Control Scheme for Medium-/High-Voltage Cascaded STATCOM