Experimental investigation and CFD modelling analysis of finned-tube PCM heat exchanger for space heating
X.Y. Zhang,Y.T. Ge,Burra,P.Y. Lang
DOI: https://doi.org/10.1016/j.applthermaleng.2024.122731
IF: 6.4
2024-02-17
Applied Thermal Engineering
Abstract:The integration of a Latent Heat Thermal Energy Storage System (LHTES) with a Phase Change Material (PCM) heat exchanger for space heating has significant potential for reducing energy consumption and saving operational costs. Correspondingly, a purpose-designed finned-tube PCM heat exchanger was fabricated, utilizing airflow as the heat transfer fluid (HTF), and incorporating organic PCM A27 within tubes. This heat exchanger was then integrated into an air conditioning unit with controlled parameters of incoming airflow. A series of experiments were carried out to examine the heat transfer performance of this PCM heat exchanger throughout PCM charging and discharging processes at different operating conditions. Subsequently, for each process, PCM temperature distributions, heat transfer rates between HTF and PCM, as well as phase change times, were obtained from experiments. To further enhance the heat transfer and energy storage of this PCM finned-tube heat exchanger and visually understand the processes of energy charging and discharging, a validated computational fluid dynamics (CFD) model was developed to investigate its performance improvements at different operating and design conditions, including different HTF velocities, varied HTF temperatures, and enhanced PCM thermal conductivities. Moreover, the improvements were quantified by analysing the reductions in PCM melting/solidification times and also energy efficiencies. It can be concluded from both experiments and CFD simulations that a higher HTF flow rate can greatly reduce the completion time of PCM phase change. Although higher HTF temperature in the charging process and lower HTF temperature in the discharging process contribute to lower phase change time, they both lead to lower energy efficiencies. Moreover, it is possible to achieve maximum reductions of 46 % and 35 % in the melting and solidification times respectively by improving the thermal conductivity of PCM. The results of the present research provide valuable operation support and optimal design criteria for the LHTES system incorporating a compact PCM finned-tube heat exchanger.
energy & fuels,engineering, mechanical,thermodynamics,mechanics