Shape Selection of Alkane Hydroisomerization over One-Dimensional Zeolite Supported Pt Catalyst: Pt/ZSM-48 versus Pt/ZSM-22
Sida Ge,Zunlong Hu,Haodong Xie,Shiao Gao,Zhuwen Zhang,Zhijie Wu
DOI: https://doi.org/10.1016/j.micromeso.2024.113179
IF: 5.876
2024-05-17
Microporous and Mesoporous Materials
Abstract:Hydroisomerization of long-chain n-alkanes plays a vital role in petrochemical and coal chemical industries, because it can produce high-quality hydrocarbon fuels and lubricant base oils. ZSM-48 (0.56 ×0.53 nm) and ZSM-22 (0.57 nm×0.46 nm) are characteristic of one-dimensional 10-ring zeolites suitable for n-alkane hydroisomerization reaction. Here, the effect of the structure difference between ZSM-48 and ZSM-22 zeolites on hydroisomerization is titrated by the isobutane and n-dodecane. The product distribution of hydroisomerization of isobutane to n-butane shows the reaction pathway on Pt/ZSM-48 and Pt/ZSM-22, in which the monomolecular hydroisomerization of isobutane is involved within the active sites in zeolite channels, while the polymerization-cracking bimolecular reaction occurs on the pore-mouth of zeolite. Pt/ZSM-48 zeolite, possessing larger channel and aperture size than those of Pt/ZSM-22, is more conducive to the diffusion of butane molecules and bimolecular polymerization. Therefore, the isobutane conversion (14 %) on Pt/ZSM-48 produces less C 1 +C 2 (1.73 wt% vs. 3.41 wt%) and more C 3 +C 5 +C 8 (19.22 wt% vs. 16.92 wt%). For the hydroisomerization of n-dodecane, the iso-dodecane selectivity of Pt/ZSM-48 (43.32 wt%) is significantly higher than that of Pt/ZSM-22 (12.38 wt%) at the similar n-C 12 conversion (40 %). Compare with the isomers of Pt/ZSM-22, the mono-branched isomers with methyl near the middle of the chains and multi-branched isomers are more easily formed on Pt/ZSM-48, which is conducive to the "key-lock" catalysis mechanism. The larger pore size of ZSM-48 is conducive to n-C 12 insertion into zeolite pores, methyl migration and isomer diffusion, and its adjacent pores are more compatible with double-branched isomers. In addition, a high selectivity of C 4 ∼C 5 alkanes (53.2 wt%) on Pt/ZSM-22 and a high selectivity of C 6 ∼C 9 alkanes (44.7 wt%) on Pt/ZSM-48 show obvious difference in cracking product distribution, implying different position of methyl groups in i-C 12 methyl on Pt/ZSM-22 and Pt/ZSM-48 samples, respectively. The present comparison between Pt/ZSM-48 and Pt/ZSM-22 benefits the selection and development of one-dimensional zeolite-supported metal catalyst in a wide range of hydro-processing reactions.
materials science, multidisciplinary,chemistry, applied,nanoscience & nanotechnology, physical