A Fluid-Structure Coupled Transient Mixed Lubrication Model for Piston Ring Lubrication Property Analysis with CMFF Method

Bowen Jiao,Xuan Ma,Yongqiang Wang,Xiuyi Lyu,Tongyang Li,Zhigang Liu

DOI: https://doi.org/10.1016/j.ijmecsci.2023.108377

IF: 7.3

2023-01-01

International Journal of Mechanical Sciences

Abstract:The bore's circumferential cross-section is not always a perfect circle, due to manufacturing errors, installation, and the influence of high-temperature and high-pressure gas, especially for a cylinder liner of the two-stroke marine diesel engine. This non-axisymmetric feature significantly impacts the lubrication properties of the piston ring and cylinder liner tribo-pair. To study the tribology and lubrication properties of the tribo-pair, a fluidstructure coupled transient mixed lubrication model is developed, which incorporates the piston ring curved beam model and mixed lubrication model. The key challenge lies in integrating the interface contact issue between the piston ring and bore with the structural deformation, requiring a multi-scale modeling strategy. To address this challenge, a method of coupling mesh between the finite difference method and the finite element method (CMFF) is proposed. The approach achieves the requirement for a fine mesh for the interface contact solution while maintaining the accuracy of the curved beam model for the structural response of the piston ring. Based on the model, the lubrication performance and deformation behavior of the piston ring in an elliptical bore are comprehensively analyzed. The results are compared with those of the rigid ring model to explore the overall differences. Results reveal that the current model predicts the friction is mostly caused by asperity contact between solids at the top dead center, whereas the rigid ring model predicts viscous shearing of the lubricant. The discrepancy is mainly due to the reduction of the oil film thickness between the piston ring and the cylinder liner following the consideration of ring deformation. Moreover, the minimum clearance exhibited at the piston ring end gap demonstrates the thorough consideration of the local and global lubrication performance of piston rings in the proposed model. This is significant for the resolution of local friction and wear problems of piston rings in engineering applications. Based on the work, a new framework is established for the study of the coupled performance of piston ring dynamics and tribology.