Abstract:This work details the development and validation of a methodology for high-resolution rotor models used in hybrid Blade Element Momentum Theory Unsteady Reynolds Averaged Navier–Stokes (BEMT-URANS) CFD. The methodology is shown to accurately predict single and coaxial rotor performance in a fraction of the time required by conventional CFD methods. The methodology has three key features: (1) a high-resolution BEMT rotor model enabling large reductions in grid size, (2) a discretized set of momentum sources to interface between the BEMT rotor model and the structured URANS flow solver, and (3) leveraging of the first two features to enable highly parallelized GPU-accelerated multirotor CFD simulations. The hybrid approach retains high-fidelity rotor inflow, wake propagation, and rotor–rotor interactional effects at a several orders of magnitude lower computational cost compared to conventional blade-resolved CFD while retaining high accuracy on steady rotor performance metrics. Rotor performance predictions of thrust and torque for both single and coaxial rotor configurations are compared to test the data that the authors obtained at the NASA Langley 14- by 22-ft. Subsonic Tunnel Facility. Simulations were run with both fully turbulent and free-transition airfoil performance tables to quantify the associated uncertainty. Single rotor thrust and torque were predicted on average within 4%. Coaxial thrust and power were predicted within an average of 5%. A vortex ring state (VRS) shielding phenomenon for coaxial rotor systems is also presented and discussed. The results support that this hybrid BEMT-URANS CFD methodology can be highly parallelized on GPU machines to obtain accurate rotor performance predictions across the full spectrum of possible UAM flight conditions in a fraction of the time required by conventional higher-fidelity methods. This strategy can be used to rapidly create look-up tables with hundreds to thousands of flight conditions using a three-dimensional multirotor CFD for UAM.

Numerical Investigation on Aerodynamics of a Rectangular Blade Rotor under Mars Air Conditions Using Large Eddy Simulation

Airfoil Parameterization Evaluation Based on a Modified PARASEC Method for a H-Darrious Rotor

Static Aeroelasticity Analysis of a Rotor Blade Using a Gauss-Seidel Fluid-Structure Interaction Method

Aerodynamic performance of a characteristic airfoil at low-Reynolds number and transonic flow under Mars sand-containing environment

Aerodynamic Simulation of a Typical Multirotor e VTOL Aircraft Configuration.

Flow past triangular airfoil of variable thickness with low Reynolds number in Mars atmosphere

Experimental Force and Deformation Measurements of Bioinspired Flapping Wings in Ultra-Low Martian Density Environment

Numerical Simulation and Aerodynamic Investigation of the Intermeshing Rotor in Hover

Low-density multi-fan wind tunnel design and testing for the Ingenuity Mars Helicopter

Three-Dimensional Simulation of Micro Air Vehicles with Low-Aspect-Ratio Wings

Rotor Performance Predictions for Urban Air Mobility: Single vs. Coaxial Rigid Rotors

Numerical Study on Rotor–Building Coupled Flow Field and Its Influence on Rotor Aerodynamic Performance under an Atmospheric Boundary Layer

Achieving bioinspired flapping wing hovering flight solutions on Mars via wing scaling

Multi-objective Shape Optimization of Airfoils for Mars Exploration Aircraft Propellers

Numerical simulation investigation on aerodynamic characteristics of rotor in plateau environment

Numerical Investigation of Gas Models for Retropropulsion Flows for Future Mars Missions

Combination of Advanced Actuator Line/Disk Model and High-Order Unstructured Finite Volume Solver for Helicopter Rotors

Numerical study on aerodynamic performance of a ducted tail rotor in hover and sideward flight

Simulating tip effects in vertical-axis wind turbines with the actuator line method

Numerical Study on Aerodynamic Characteristics of Wing within Propeller Slipstream at Low-Reynolds-Number

Unsteady CFD simulation of a rotor blade under various wind conditions