Abstract:Aluminum 7075-T6 alloy has been widely employed in aviation, transport, and automobile applications due to its remarkable properties, while a lot of residual stresses can be generated in the machined surface and subsurface during the machining process. The machining parameters have significant effects on the formation of residual stress, it is important to predict the residual stress distribution with the cutting parameters and optimize the machining parameters to acquire the desirable residual profiles. Although many efforts of current studies have been paid to the prediction of residual stress profiles in different materials and machining processes, however, few works focused on residual stress in-depth profiles in the machining of 7075-T6 aluminum alloy, and the optimization of cutting parameters for required residual stress profile has also rarely been reported. Therefore, this study proposed an integrated prediction model, which combines exponential decay cosine function (EDC), particle swarm optimization (PSO), and back propagation neural network (BP), to predict the in-depth residual stress profile of the machined surface in milling of 7075-T6 aluminum alloy. Furthermore, according to the residual stress profile, the key features for describing the residual stress profile include the surface residual stress (SRS), maximum compressive residual stress (MCRS), depth of maximum compressive residual stress (DMCS), and depth of residual stress (DRS), were identified and analyzed. And a multiple objective optimization was conducted, where Kriging-based models were employed to establish the relationships between machining parameters and objectives (SRS and MCRS), and the MRR was also employed as an objective taking account of high production efficiency requirement. Finally, a two-stage optimization strategy integrating NSGA-III, MOPSO, and TOPSIS algorithms was used to address the multi-objective optimization model to obtain the expected residual stress profile and MRR. This work can provide some practical guidance for industrial production in machining 7075-T6 aluminum alloy.

Profile Error-Oriented Optimization of the Feed Direction and Posture of the End-Effector in Robotic Free-Form Milling

Stiffness-oriented Posture Optimization in Robotic Machining Applications

Dynamic Cutting Force Modeling and Experimental Study of Industrial Robotic Boring

Contour error-based optimization of the end-effector pose of a 6 degree-of-freedom serial robot in milling operation

Region-based toolpath generation for robotic milling of freeform surfaces with stiffness optimization

Uncertainty-aware error modeling and hierarchical redundancy optimization for robotic surface machining

Generating Efficient Toolpath by Cutter Posture Optimization in Five-Axis Machining Based on Inverse Feedback Mechanism

Task-dependent workpiece placement optimization for minimizing contour errors induced by the low posture-dependent stiffness of robotic milling

An accurate surface error optimization for five-axis machining of freeform surfaces

Smoothness-oriented path optimization for robotic milling processes

Research on Inverse Evaluation Mechanism in Toolpath Generation Based on Global Interpolation Simulation

A New Approach of Modelling Bottom Edge Cutting in 4-Axis Rough Milling of Complex Parts and Its Application on Feed Rate Optimization

A new toolpath generation method with feed sensitive zones inspection based on inverse evaluation mechanism.

Process optimization of robotic grinding to guarantee material removal accuracy and surface quality simultaneously

Tool orientation and redundancy integrated planning method constrained by stiffness for robotic machining of freeform surfaces

Influence mechanism of machining angles on force induced error and their selection in five axis bullnose end milling

A novel feedrate scheduling method using modifying S-shaped feedrate profile with a round-off error elimination approach for CNC machining

A novel surface topography prediction method for hybrid robot milling considering the dynamic displacement of end effector

Robotic path compensation training method for optimizing face milling operations based on non-contact CMM techniques

Modeling and optimization of surface residual stress profiles in milling of aluminum 7075-T6 alloy

Trajectory Planning and Optimization for Robotic Machining Based On Measured Point Cloud