Abstract:The most popular anode material in commercial Li-ion batteries is still graphite. However, its low intercalation potential is close to that of lithium, which results in the dendritic growth of lithium at its surface, and the formation of a passivation film that limits the rate capability and may result in safety hazards. High-performance anodes are thus needed. In this context, lithium titanite oxide (LTO) has attracted attention as this anode material has important advantages. Due to its higher lithium intercalation potential (1.55 V vs. Li+/Li), the dendritic deposition of lithium is avoided, and the safety is increased. In addition, LTO is a zero-strain material, as the volume change upon lithiation-delithiation is negligible, which increases the cycle life of the battery. Finally, the diffusion coefficient of Li+ in LTO (2 × 10−8 cm2 s−1) is larger than in graphite, which, added to the fact that the dendritic effect is avoided, increases importantly the rate capability. The LTO anode has two drawbacks. The energy density of the cells equipped with LTO anode is lower compared with the same cells with graphite anode, because the capacity of LTO is limited to 175 mAh g−1, and because of the higher redox potential. The main drawback, however, is the low electrical conductivity (10−13 S cm−1) and ionic conductivity (10−13–10−9 cm2 s−1). Different strategies have been used to address this drawback: nano-structuration of LTO to reduce the path of Li+ ions and electrons inside LTO, ion doping, and incorporation of conductive nanomaterials. The synthesis of LTO with the appropriate structure and the optimized doping and the synthesis of composites incorporating conductive materials is thus the key to achieving high-rate capability. That is why a variety of synthesis recipes have been published on the LTO-based anodes. The progress in the synthesis of LTO-based anodes in recent years is such that LTO is now considered a substitute for graphite in lithium-ion batteries for many applications, including electric cars and energy storage to solve intermittence problems of wind mills and photovoltaic plants. In this review, we examine the different techniques performed to fabricate LTO nanostructures. Details of the synthesis recipes and their relation to electrochemical performance are reported, allowing the extraction of the most powerful synthesis processes in relation to the recent experimental results.

LiEuTiO4 As a Promising Anode Material for a Safe 4 V Lithium-Ion Battery

A Safe Electrolyte Enriched with Flame-Retardant Solvents for High-Voltage LiCoO2||Graphite Pouch Cells

Non-destructive Chemical Prelithiation of VO2(B) Anodes Constructing a Multifunctional Interphase Layer for Advanced Li-Ion Batteries

Fabrication of Dual-Modified Carbon Network Enabling Improved Electronic and Ionic Conductivities for Fast and Durable Li2TiSiO5 Anodes

Self-Supporting and Binder-Free Anode Film Composed of Beaded Stream-Like Li4ti5o12 Nanoparticles for High-Performance Lithium-Ion Batteries

Interface Engineering via Regulating Electrolyte for High‐Voltage Layered Oxide Cathodes‐Based Li‐Ion Batteries

Cation-deficient Perovskite Li0.35Nd0.55TiO3 As a High-Performance Anode for Lithium-Ion Batteries

Fabrication of Li4Ti5O12 (LTO) as Anode Material for Li-Ion Batteries

Effective Oxygen‐Deficient Li4Ti5O12 Anode Material Displaying Excellent Rate Performance and Outstanding Cyclic Stability

Interfacial-engineering-enabled High-Performance Li-rich Cathodes

Conductive Robust Interfaces with Fluoro-Borate Based Electrolyte Additive for 4.6 V Well-Cycled LiNi0.90Co0.06Mn0.04O2||Li Batteries

Surface Modification Engineering Enabling LiMn x Fe1‐ x PO4 Cathode Against Aggressive Cathode Chemistries for Excellent Performance Lithium‐ion batteries

Li4Ti5O12 Coated by Biomass-Derived Carbon Quantum Dots as Anode Material with Enhanced Electrochemical Performance for Lithium-Ion Batteries

Nonflammable all-fluorinated electrolytes enabling high-power and long-life LiNi0.5Mn1.5O4/Li4Ti5O12 lithium-ion batteries

Two-Step Fabrication of Li4Ti5O12-Coated Carbon Nanofibers as a Flexible Film Electrode for High-Power Lithium-Ion Batteries

High-Energy-Density and Long-Lifetime Lithium-Ion Battery Enabled by a Stabilized Li2O2 Cathode Prelithiation Additive

Highly Active Depleting Agent of Lithium Enabled High-Rate and Long-Life Lithium Metal Batteries

3D Porous Cu-Composites for Stable Li-Metal Battery Anodes

Carbon coated porous Co3O4 polyhedrons as anode materials for highly reversible lithium-ion storage

In-situ Modification of Ultrathin and Uniform Layer on LiCoO2 Particles for 4.2 V Poly(ethylene Oxide) Based Solid-State Lithium Batteries with Excellent Cycle Performance

Synthesis and electrochemical performance of nanoporous Li4Ti5O12 anode material for lithium-ion batteries