Abstract:Solid oxide electrochemical cell (SOC) is a highly promising alternative for fuel conversion and power-to-gas due to its high efficiency and low emission. However, degradation resulting from the electrolyte-electrode interface is a major challenge in both fuel cell mode and electrolysis mode. Here, a co-sintering tri-layer structure cell with nano composite oxygen electrode is developed to mitigate the interface issue. A 10 x 10 cm(2) NiO/YSZ lYSZ lYSZ-La0.6Sr0.4Co0.2Fe0.8O3-25 (LSCF) cell has been conducted under different fuels in SOFC mode. A power density output of 558 mW/cm(2) @0.7 V-800 degrees C in wet H-2 and a durability of 300 h in simulated syngas have been obtained. The performance of LSF, LSCF and SSC oxygen electrodes have been studied in both SOFC and SOEC modes. It suggests that three oxygen electrodes have an order of SSC > LSCF > LSF in electrochemical performance, and an opposite order in stability of SOEC. The degradation of the LSCF and SSC can be derived from the solid-state reactions at the interface between Co-containing perovskites and YSZ during operation. It demonstrates that GDC and Ag modification can enhance the oxygen elettro destability by impeding the soli state reactions and the nanoparticles sintering. Results suggest that GDC has a negative effect on the cell performance and Ag has a positive effect, implying that enhancing the electric conductivity of YSZ-LSCF is the key to improve the cell performance. Moreover, cell with YSZ-SFM/GDC has been applied in CH4 assisted SOEC process (CH4-SOEC), in which a significant reduction of electricity consume can be realized. (C) 2019 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.

Chemical Stability Study of Li2SO4 on the Operation Condition of a H2/O2 Fuel Cell

Investigation on LiNaSO4–Al2O3 ceramics as electrolytes for H2/O2 fuel cells

Compatibility of lithium salts with solvent of the non-aqueous electrolyte in Li-O2 batteries.

Electrical and Stability Performance of Anode-Supported Solid Oxide Fuel Cells with Strontium- and Magnesium-Doped Lanthanum Gallate Thin Electrolyte

Thermal stability study of La0.9Sr0.1Ga0.8Mg0.2O2.85–(Li/Na)2CO3 composite electrolytes for low-temperature solid oxide fuel cells

Thermal Stability of LSGM-Carbonates Composite Electrolytes for Low-Temperature Solid Oxide Fuel Cells

Stability of Ce0.8Sm0.2O2 Electrolyte and Mn1.5CO1.5O4 for Solid Oxide Fuel Cells

Investigation into the Effects of Sulfur on Syngas Reforming Inside a Solid Oxide Fuel Cell

High performance and stability of nanocomposite oxygen electrode for solid oxide cells

Sulfur-Tolerant Anode Catalyst for Solid Oxide Fuel Cells Operating on H2s-Containing Syngas

Ionic Transport Mechanism of La0.9sr0.1ga0.8mg0.2o2.85-(Li/Na)(2)Co3 Composite Electrolyte for Low Temperature Sofcs

Tuning Solid Electrolyte Interface Against Oxygen/superoxide-Derived Attack on Li-metal Anode in Li-O2 Battery

Molecular Design of Stable Sulfamide- and Sulfonamide-based Electrolytes for Aprotic Li-O2 Batteries.

Three-dimensional Structural Analyses of the Oxygen Electrodes in Solid Oxide Electrolysis Cells

Core-Shell Structured Li0.33la0.56tio3 Perovskite As A Highly Efficient And Sulfur-Tolerant Anode For Solid-Oxide Fuel Cells

Studies On The Conductivity Of Liagso4-Al2o3 Composite Electrolyte

Unravelling the oxidation behaviors of porous stainless steel 430L substrate for metal-supported solid oxide fuel cells

Electrochemical Stability of La0.6Sr0.4Co0.2Fe0.8O3−δ-infiltrated YSZ Oxygen Electrode for Reversible Solid Oxide Fuel Cells

OPTIMIZATION OF SDE-(Li/Na)2CO3 COMPOSITE ELECTROLYTE FOR LOW-TEMPERATURE SOLID OXIDE FUEL CELL APPLICATIONS

Long-term Stability of Metal-Supported Solid Oxide Fuel Cells Employing in Fi Ltrated Electrodes

Improved Stability of Oxysulfide Solid-State Electrolytes in Li(G3)TFSI Solvate Ionic Liquid Electrolyte