Abstract:The Heusler-type Fe2VAl alloy is a promising candidate for use in fabricating a thermoelectric power generation device because of its large Seebeck coefficient and high electrical conductivity. However, the high thermal conductivity of this alloy, as a thermoelectric material, degrades its power generation capacity. In this study, to reduce its thermal conductivity, the microstructure of a sintered Fe2V1.08Al0.92 alloy prepared via a powder metallurgical process was modified by adding oxide nanoparticles. Via the dispersion of Al2O3 nanoparticles, a sintered Fe2V1.08Al0.92 alloy with fine grains of approximately 200 nm in size was obtained due to the pinning effect on grain growth during sintering. The thermal conductivity was reduced from 16 to 11 W/mK. Upon La2O3 addition, the grain size of the Fe2V1.08Al0.92 alloy was reduced to approximately 100 nm and the thermal conductivity was further reduced to 10 W/mK. The difference in grain refinement could be caused by the lower stability of La2O3, which facilitated dispersion during ball milling, compared to that of Al2O3. As these microstructure refinements negatively affected the electronic properties, the thermoelectric performance of the Fe2V1.08Al0.92 alloy could not be enhanced. However, partial microstructure refinement with sparsely distributed La2O3 could slightly enhance the thermoelectric performance due to an appreciable reduction in the thermal conductivity without a considerable degradation in the electronic properties. By using these thermoelectric properties, a simple estimation of thermoelectric power generation, assuming a thermal resistance between the heat sources and thermoelectric module, was conducted. Remarkably, the results suggested that the reduction in thermal conductivity could enhance the output power density and conversion efficiency and reduce the optimal leg length. Thus, practically, controlling the balance between the electronic and thermal properties via microstructural modification is favorable in improving the practicability of the Fe2VAl alloy by enhancing the power generation capacity and reducing the sizes and masses of thermoelectric devices.

Investigation on Thermoelectric Materials of Ni-Al-M System Heusler Alloy

Thermoelectric Properties and Performance Enhancement of Ni-Al-Ti Heusler Alloy

A Molecular Dynamics Study on Mechanical Performance and Deformation Mechanisms in Nanotwinned NiCo-based Alloys with Nano-Precipitates under High Temperatures

Computational Search for Better Thermoelectric Performance in Nickel-Based Half-Heusler Compounds

Structure, Magnetic and Magnetocaloric Properties of Ni2MnGa Heusler Alloy Nanowires

Investigations of microstructures and thermoelectric properties of TiNiSn half-Heusler compounds with micro- and nano-scale copper additions

Thermoelectric Performance of Half-Heusler Compounds TiNiSn and TiCoSb

The Mechanical Properties of Intermetallic Ni50−xTi50Alx Alloys (X=6,7,8,9)

Study of the Mechanical and Thermodynamic Properties on NiAl and Ni3Al

High thermoelectric performance in metallic NiAu alloys

Investigation for Performance Enhancement of Ni/TiO2-x Composite Thermoelectric Material by Monte-Carlo Finite Element Method

Investigation on the electronic structures, elastic and thermodynamic properties of TiNi, Ti 2 Ni and TiNi 3 intermetallic compound

Effect of Antimony Doping on Thermoelectric Properties of Zr0.5Ti0.5Sn Multi-Element Alloys

Engineering the Thermoelectric Transport in Half‐Heusler Materials through a Bottom‐Up Nanostructure Synthesis

High-performance Nanostructured Thermoelectric Materials

Microstructure of a spark-plasma-sintered Fe2VAl-type Heusler alloy for thermoelectric application

Analysis of Properties of Ni/TiO<sub>2-<i>x</i></sub> Composite Thermoelectric Materials by Monte Carlo Finite Element Method

Microstructures and Thermoelectric Properties of Heusler Fe 2 VAl Alloys Containing Oxide Nanoparticles

First-principles study of disordered half-Heusler alloys \textit{X}Fe$_{0.5}$Ni$_{0.5}$Sn (\textit{X} = Nb, Ta) as thermoelectric prospects

Structural Evolution of High‐Performance Mn‐Alloyed Thermoelectric Materials: A Case Study of SnTe

Integrated First Principles and Experimental Investigation of Thermoelectric Transport in Zr/Ti Half‐Heusler‐Type High Entropy Alloys