Abstract:The accumulation of energy produced by renewable sources to be used when demand is high is a key aspect of a truly decarbonized grid. Among all energy accumulation technologies, Redox Flow Batteries (RFBs) are specially promising due to its safety, flexibility of design and the ability to decouple capacity and power of the system. In a standard configuration, both redox electrolytes that are stored in external tanks are pumped in the electrochemical reactor separated only by an ion-selective membrane. This membrane is a critical part of the battery as it allows the selective pass of certain ions that compensate the charge imbalances while maintaining separated the active species in their respective compartments. Membranes used in RFB are expensive (up to 25% of the total cost in vanadium RFB), contribute greatly to the ohmic resistance of the battery, and the undesired crossover through it is never fully avoided which produces a performance decay of the battery over time. These issues are addressed by membrane-free RFB designs developed in our group. The idea behind MFreeB ERC project is to take advantage of the immiscibility of certain liquids to naturally separate redox active species in a membrane-free battery design [1]. Aqueous Biphasic Systems (ABSs) are a special example of all-aqueous natural occurring immiscible phases made by mixing water with two compounds that can be either polymers, inorganic salts or both. The two redox active species added to the biphasic system can be rationally selected and optimized so that they partition specifically to one of the two phases used as anolyte and catholyte [2]. These types of batteries have been proposed by several groups, including us, mostly as "static batteries" because filter-press reactors, typically used in conventional RFB, cannot be easily adapted to this membrane-free concept. In order to develop truly flowing systems, a totally different electrochemical reactor should be designed. Here, we report on the development of an electrochemical reactor that allows the formation of the two immiscible phases making possible the testing of immiscible batteries under flowing conditions for the first time. A counterflow flow-through configuration was used since it reduces flow instabilities while at the same time it allows high conversion rates in the carbon felt electrodes avoiding mass transport issues [3]. Several tests were performed in the battery; e.g. polarization curves, charge and discharge cycling and efficiency over time were measured. Moreover, the self-discharge phenomena, occurring near the interface when charged species enter in contact and provoking a loss of efficiency, was evaluated as a function of operating conditions. Special attention was given to the study of the different processes occurring in the region near the interface in order to mitigate losses and further optimize the design. Acknowledgments This work has been partially funded by project MFreeB which have received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (Grant Agreement No. 726217). References [1] P. Navalpotro et al., Angew. Chem. Int. Ed. 56 (2017), 1–6. [2] P. Navalpotro et al., Energy Storage Materials. 26 (2020) 400-407. [3] International patent WO 2021/209585 A1. Redox Flow Battery with Immiscible Electrolyte and Flow Through Electrode.

Non-aqueous Organic Redox Active Materials for a Bicontinuous Microemulsion-Based Redox Flow Battery

A New Aqueous All-Organic Flow Battery with High Cell Voltage in Acidic Electrolytes

Enhanced Stability and Efficiency of 2-Maq|fc Redox Flow Battery with a Microemulsion Electrolyte

(Invited) Mixed Redox-Active Molecules for High-Energy-Density and Stable Organic-Based Redox Flow Batteries

A pH‐Neutral, Aqueous Redox Flow Battery with a 3600‐Cycle Lifetime: Micellization‐Enabled High Stability and Crossover Suppression

All-Liquid Electroactive Materials for High Energy Density Organic Flow Battery

Long‐Life Aqueous Organic Redox Flow Batteries Enabled by Amidoxime‐Functionalized Ion‐Selective Polymer Membranes

Re-discovering micro-emulsion electrolytes: a biphasic electrolyte platform for Organic redox flow batteries

Stable Aqueous Redox Flow Battery Assembled in Air Atmosphere Employing an Anionic Terpolymer As Active Cathode Material

A Novel, Membrane Free Redox Battery Design Using Organic/Inorganic Redox Pair in Aqueous System

High-Energy, Single-Ion-Mediated Nonaqueous Zinc-TEMPO Redox Flow Battery

[4]Helicenium Ion as Bipolar Redox Material for Symmetrical Fully Organic Pole-less Redox Flow Battery

An All-Soluble Fe/Mn-Based Alkaline Redox Flow Battery System

Materials and Systems for Organic Redox Flow Batteries: Status and Challenges

Redox Flow Batteries for Energy Storage: A Technology Review

Organic redox flow batteries in non-aqueous electrolyte solutions

A Low Potential Solvent-Miscible 3-Methylbenzophenone Anolyte Material for High Voltage and Energy Density All-Organic Flow Battery

Functional materials for aqueous redox flow batteries: merits and applications

Mixed-Valent Redox-Equilibrated Polyoxovanadates for Symmetric Non-Aqueous Redox-Flow Batteries

Close Contact without Mixing: All-Aqueous Membrane-Free Flow Battery

Organic Redox Flow Battery: Are Organic Redox Materials Suited to Aqueous Solvents or Organic Solvents?