Abstract:This paper endows recycled aggregate with photocatalytic properties considering its porous structure. It then prepares recycled-aggregate pervious concrete with photocatalytic–adsorptive synergistic functions to improve reusing construction and demolition waste and reduce the pollution of urban rainwater runoff. To this end, traditional photocatalyst TiO2 is modified by introducing hydrotalcite, layered double hydroxides (LDHs), and the calcined LDHs and TiO2 are mixed to form a composite photocatalytic material, i.e., TiO2/LDHs. Then, we composite different concentrations of TiO2/LDHs with the recycled aggregate by the soaking method to prepare recycled-aggregate pervious concrete. This work studies the effect of TiO2/LDHs on the physical and mechanical properties of recycled-aggregate pervious concrete. The purification performance of the pervious concrete containing TiO2/LDHs-loaded recycled aggregate in the photocatalytic–adsorptive synergistic degradation of liquid pollutants is also measured. In addition, a kinetic model is employed to explore the rate and mechanism of the photocatalytic–adsorptive synergistic degradation. Our findings indicate a significant enhancement in the material properties. Specifically, the addition of TiO2/LDHs led to an approximate reduction of 20% in both porosity and permeability, while concurrently augmenting the compressive strength by nearly 40%. The TL-0.8 specimens have the best physical and mechanical properties: the 28-day compressive strength, permeability coefficient, and porosity reach 27.4 MPa, 1.65 mm/s, and 14.69% respectively. The TL-0.6 specimens have the highest performance in degrading the methylene blue solution, and the degradation rate reaches 65%; the Langmuir pseudo-first-order kinetic model describes the degradation. The TL-0.8 specimens have the highest performance in adsorbing nitrate ions, and the removal rate reaches 56.8%; the adsorption follows the Lagergren pseudo-first-order kinetic model. The mechanism of the photocatalytic–adsorptive synergistic degradation shows that liquid pollutants are first adsorbed onto the surface of the recycled-aggregate pervious concrete, and photocatalytic reactions occur under the action of ultraviolet rays; then, the reaction products are desorbed from the concrete surface or diffuse into its pores, that is, the directional transfer of pollutants, realizing the purification of liquid pollutants.

Influence of MgAl-LDHs/TiO2 Composites on the Mechanical and Photocatalytic Properties of Cement Pastes and Recycled Aggregates

Impacts of Mg/Al-layered double hydroxide modified with polycarboxylate on the properties of cement paste

The Effect of TiO2 Doped Photocatalytic Nano-Additives on the Hydration and Microstructure of Portland and High Alumina Cements

Studying properties of pervious concrete containing recycled aggregate loaded with TiO<sub>2</sub>/LDHs and its liquid pollutant purification

Compatibility and Photocatalytic Capacity of the Novel Core@shell Nanospheres in Cementitious Composites

Studying properties of pervious concrete containing recycled aggregate loaded with TiO2/LDHs and its liquid pollutant purification

NO x degradation by cement mortar containing B-TiO 2 /MgAl-CLDH under visible light: Experimental and modeling

Influence of TiO2 Nanoparticles on the Physical, Mechanical, and Structural Characteristics of Cementitious Composites with Recycled Aggregates

Effect of LDH on the dissolution and adsorption behaviors of sulfate in Portland cement early hydration process

Influence of the Addition of TiO2 Nanoparticles on the Self-Cleaning Capacity of Cementitious Composites

Mechanical performance and thermal stability of hardened Portland cement-recycled sludge pastes containing MnFe2O4 nanoparticles

Surface properties and de-polluting performance of a photocatalytic coating incorporating novel core@shell nanospheres for cementitious substrate

Influence of Dolomite Rock Powder and Iron Tailings Powder on the Electrical Resistivity, Strength and Microstructure of Cement Pastes and Concrete

Effects of Layered Double Hydroxide Nanosheets with Different Cations on the Compressive Strength of Cement Composites

Photocatalytic properties, mechanical strength and durability of TiO2/cement composites prepared by a spraying method for removal of organic pollutants

Effects of partial substitution of calcium alumino-titanate on the properties and microstructure of mullite–cordierite composites

Thermal and Mechanical Properties of Cement Mortar Composite Containing Recycled Expanded Glass Aggregate and Nano Titanium Dioxide

Photocatalytic activity of porous magnesium oxychloride cement combined with AC/TiO2 composites

Efficient Recycling Blast Furnace Slag by Constructing Ti-Embedded Layered Double Hydroxide as Visible-Light-Driven Photocatalyst

Dispersion Characteristics of Various Contents of Nano‐tio2 and Its Effect on the Properties of Cement‐based Composite

IMPACT OF ALUMINOSILICATE WASTES ON THE HYDRATION, PHYSICAL AND MECHANICAL PROPERTIES OF CEMENT PASTE