Abstract:Reconfigurable intelligent surface (RIS)-aided terahertz (THz) communications have been regarded as a promising candidate for future 6G networks because of its ultra-wide bandwidth and ultra-low power consumption. However, there exists the beam split problem, especially when the base station (BS) or RIS owns the large-scale antennas, which may lead to serious array gain loss. Therefore, in this paper, we investigate the beam split and beamforming design problems in the THz RIS communications. Specifically, we first analyze the beam split effect caused by different RIS sizes, shapes and deployments. On this basis, we apply the fully connected time delayer phase shifter hybrid beamforming architecture at the BS and deploy distributed RISs to cooperatively mitigate the beam split effect. We aim to maximize the achievable sum rate by jointly optimizing the hybrid analog/digital beamforming, time delays at the BS and reflection coefficients at the RISs. To solve the formulated problem, we first design the analog beamforming and time delays based on different RISs physical directions, and then it is transformed into an optimization problem by jointly optimizing the digital beamforming and reflection coefficients. Next, we propose an alternatively iterative optimization algorithm to deal with it. Specifically, for given the reflection coefficients, we propose an iterative algorithm based on the minimum mean square error technique to obtain the digital beamforming. After, we apply LDR and MCQT methods to transform the original problem to a QCQP, which can be solved by ADMM technique to obtain the reflection coefficients. Finally, the digital beamforming and reflection coefficients are obtained via repeating the above processes until convergence. Simulation results verify that the proposed scheme can effectively alleviate the beam split effect and improve the system capacity.

Wideband Precoding for RIS-Aided THz Communications

Beamforming Analysis and Design for Wideband THz Reconfigurable Intelligent Surface Communications

Hybrid Beamforming for RIS-Empowered Multi-hop Terahertz Communications: A DRL-based Method

Beamforming Design for RIS-Aided THz Wideband Communication Systems

Joint Hybrid 3D Beamforming Relying on Sensor-Based Training for Reconfigurable Intelligent Surface Aided TeraHertz-Based Multiuser Massive MIMO Systems

Beamforming Design for the Distributed RISs-aided THz Communications with Double-Layer True Time Delays

Wideband Beamforming for STAR-RIS-assisted THz Communications with Three-Side Beam Split

Joint Precoding for RIS-Assisted Wideband THz Cell-Free Massive MIMO Systems

Joint Beamforming Design for Active RIS-Aided THz ISAC Systems with Delay Alignment Modulation.

Active RIS-Aided Terahertz Communications with Phase Error and Beam Misalignment

Secure Beamforming Design for Reconfigurable Intelligent Surface Assisted Downlink Transmission

Reconfigurable Intelligent Surface Aided Hybrid Beamforming: Optimal Placement and Beamforming Design

Multi-Hop RIS-Empowered Terahertz Communications: A DRL-Based Hybrid Beamforming Design

A Robust Deep Learning-Based Beamforming Design for RIS-Assisted Multiuser MISO Communications with Practical Constraints

Beamforming Design for Multiuser Transmission Through Reconfigurable Intelligent Surface.

Robust Beamforming for RIS-Assisted Wireless Communications with Discrete Phase Shifts.

Hybrid 3D Beamforming Relying on Sensor-Based Training and Channel Estimation for Reconfigurable Intelligent Surface Aided TeraHertz MIMO systems

Robust Communication Design in RIS-Assisted THz Channels

Performance and Optimization of Reconfigurable Intelligent Surface Aided THz Communications

Accurate Beam Training for RIS-Assisted Wideband Terahertz Communication

Analytical Beam Training for RIS-Assisted Wideband Terahertz Communication