Abstract:Heat pipe cooled reactor is designed to meet the future energy demands with many unique advantages such as modularization, solid and static state, high reliability and passive safety. In the innovative nuclear reactor design, heat pipes are used to cool the reactor core and transfer the fission heat passively, thermoelectric generators (TEGs) are utilized to achieve static energy conversion. In this article, a finite element model is established to investigate the detailed TEG thermoelectric performance coupled with heat pipes. A temperature field and flow field coupling model is used to simulate the heat transfer performance of the potassium heat pipe including a heat pipe wall, wick and vapor region. A heat pipe TEG experimental setup is established and the steady‐state experiment is conducted. The experimental setup is selected as the numerical simulation object and the simulated results are compared with the experimental data to verify the numerical model. The maximum simulation error is within 5%. Based on the verification and validation, the steady‐state thermoelectric performances, the effect of contact thermal resistance and external load on the skutterudite TEG thermoelectric performances are investigated. The detailed heat flux distributions, temperature distributions and potential distributions are researched in the steady‐state simulation. The temperature distributions of the TEG cross section are centrally symmetrical and the horizontal temperature difference is 26°C. The temperature difference introduced by thermal resistance at the TEG hot side increases from 33°C to 94°C with the increasing heat flux through TEG module. The influence of thermal resistance on TEG hot side is more significant than that on TEG cold side. The effect of external load on TEG output characteristics is investigated under different heat flux conditions. With the increase of heat flux from 60 to 166 kW/m2, the temperature difference of TEG module and p‐n unit increase by 432°C and 348°C, the thermoelectric conversion efficiency is improved from 3.6% to 8.5%, and output power increases by 20 W, respectively. The research results are of guiding significance for exploring the application potential of TEGs in the static heat pipe cooled reactor. This work provides research foundations for the multiphysics coupling analysis of the micro heat pipe cooled reactor.

Investigations on Thermoelectric Characteristic of Heat Pipe Thermoelectric Generator Waste Heat Utilization Device in Nuclear Power System

Experimental Investigation of a Novel Heat Pipe Thermoelectric Generator for Waste Heat Recovery and Electricity Generation

Experimental Study on Heat Pipe Thermoelectric Generator for Industrial High Temperature Waste Heat Recovery

Thermal-hydraulic Analysis of Heat Pipe Reactor Experimental Device with Thermoelectric Generators

Thermoelectric Generator Design and Characterization for Industrial Pipe Waste Heat Recovery

Thermoelectric performance study on a heat pipe thermoelectric generator for micro nuclear reactor application

Optimal Number of Thermoelectric Couples in A Heat Pipe Assisted Thermoelectric Generator for Waste Heat Recovery

Performance enhancement of heat pipes assisted thermoelectric generator for automobile exhaust heat recovery

Transient Thermoelectric Characteristics of the Principle Prototype for the Heat Pipe Cooled Nuclear Silent Themoelectirc Reactor (NUSTER)

Experimental investigation and optimization analysis on thermoelectric water generator integrated with heat pipe

Heat transfer analysis of heat pipe cooled device with thermoelectric generator for nuclear power application

Experimental Investigation for a Novel Prototype of a Thermoelectric Power Generator With Heat Pipes

Waste Heat Recovery Through Plate Heat Exchanger Based Thermoelectric Generator System

Design and optimization of three segmented thermoelectric generator for nuclear reactor application

Experimental Study on Transient Heat Transfer Performance of High Temperature Heat Pipe under Temperature Feedback Heating Mode for Micro Nuclear Reactor Applications

Design and Research of Thermoelectric Generator Simulation System for Boiler Flue Gas Waste Heat

Thermal-electrical Coupling Characteristic Analysis of the Heat Pipe Cooled Reactor with Static Thermoelectric Conversion

Numerical analysis of segmented thermoelectric generators applied in the heat pipe cooled nuclear reactor

Heat Transfer Characteristics of Thermoelectric Generator System for Waste Heat Recovery from a Billet Casting Process: Experimental and Numerical Analysis

Experiments on Waste Heat Thermoelectric Generation for Passenger Vehicles

Experimental Investigation on the Heat Transfer Performance of High-Temperature Potassium Heat Pipe for Nuclear Reactor