Abstract:Understanding vapor transport of water in nanoporous shale is challenging due to the coexistence of multiple water phases within a multi-mineral aggregate with complex multiscale pore architecture. We explore this response through dynamic vapor sorption experiments and modeling on two shale samples with differing fractions of hydrophilic clays and contrasting pore architecture. Measured diffusion coefficients of water vapor in the two shales are of the order of magnitude of 10−12 - 10−10 m2/s, increasing with relative humidity (Rh) except at high Rh during adsorption process. The drop in diffusivity at high Rh during adsorption results from the impeding effect of capillary-occluding air bubbles and flattening of the pore-entry menisci. We propose a model for water vapor transport accommodating surface flow of adsorbed water and viscous flow of capillary water – with active mechanisms operational in different pore size populations. Actual pore size distributions (PSDs) are characterized by low pressure nitrogen adsorption. Predictions from the proposed transport model, utilizing these measured PSDs, are consistent with the measured diffusion behavior during desorption, also replicating water uptake behavior across the full spectrum of 0 < Rh < 1. Observations and modeling illustrate that phase type and pore size significantly influence water vapor sorption and transport behaviors. Storage of the adsorbed phase dominates the total water uptake at low Rh (< 0.6) while the condensed phase dominates at Rh > 0.6. Surface flow of the adsorbed phase contributes predominantly to the total flux over a wide range of Rh (< 0.96) while viscous flow of capillary water dominates only at very high Rh values (> 0.98). In terms of pore size effects, macropores (> 50 nm) contribute little to the total water adsorption but comprise more than of the 68% total water flux. Conversely, micropores (< 2 nm), contribute moderately to water adsorption (7%–40%) but insignificantly to the total flux. Intermediate-sized mesopores (2–50 nm) play an important role in both total water adsorption and transport over the entire range of Rh. Sensitivity analysis of temperature (30–90 °C) indicates that diffusion coefficient of water vapor can be enhanced at higher temperature due to a lower viscous resistance of water to flow.

Modeling Diffusion and Types I-V Sorption of Water Vapor in Heterogeneous Systems

Multi-Material Modeling of Sorption-Desorption Processes with Experimental Validation

Modeling and Uncertainty Quantification of Vapor Sorption and Diffusion in Heterogeneous Polymers.

Rigorous Models for Vapor Diffusion in Polymers with Immobilization and Chemical Potential Gradients

Expeditious modeling of vapor transport and reactions in polymeric materials

A Fickian Model for Temperature-Dependent Sorption Hysteresis in Hygrothermal Modeling of Wood Materials

Moisture sorption kinetics for water-soluble substances. III: Theoretical and experimental studies in air

Diffusion Hysteresis in Unsaturated Porous Media: A Microfluidic Study

Uncertainty Quantification of Multiple Gas Transport and Sorption in Porous Polymers

Heat and Moisture Transport in Unsaturated Porous Media -- A Coupled Model in Terms of Chemical Potential

Water vapor transport to material surfaces-Simplified analytical expressions for non-linear material properties

Comprehensive Analytical Sorption Thermodynamic (CAST) model for water vapor sorption in cellulosic materials

Thermally Induced Diffusion of Chemicals under Steady-State Heat Transfer in Saturated Porous Media

A Numerical Comparison of Ionic Multi-Species Diffusion with and without Sorption Hysteresis for Cement-Based Materials

Evaluation and modeling of water vapor sorption and transport in nanoporous shale

Impact of Vapor Sorption on the Subsurface Transport of Volatile Organic Compounds: A Numerical Model and Analysis

Reaction–diffusion approach to modeling water diffusion in glutinous rice flour particles during dynamic vapor adsorption

Contaminant Transport Modelling in Porous Media Coupled with Homogeneous/heterogeneous Chemical Reactions

Numerical modeling of drying from saturated to unsaturated conditions with two-phase partitioning boundaries at the medium surface and interface-dependent phase change

Dynamic Triple-Mode Sorption and Outgassing in Materials.

Modelling of surface reactions and diffusion mediated by bulk diffusion