Abstract:The window-ejected thermal plume along the building facade is one of the most classical scientific problems of building fire dynamics, which is an important transition of the fire from the inside of the compartment to the building facade. The present study investigates the temperature profiles and evolutions of the window-ejected thermal plume by experimental and theoretical analysis. The experiments were conducted using a reduced-scale cubic compartment and a facade. Threedimensional (transverse/lateral/vertical) temperature fields are measured and quantified by the thermocouple array considering various heat release rates, window dimensions and its aspect ratios. It is found that: (1) the vertical temperature along the center line of facade first increases then changes a little at the flame region, decreases at the plume region. (2) The transverse or lateral temperature decreases more significantly at the flame region than the plume region. (3) For the flame region, the temperature first changes a little or decreases slightly with increasing transverse distance, however, for the plume region, the temperature first increases, then decreases with increasing transverse distance. A physical model of the window-ejected thermal plume considering the flame and plume regions including characteristic length scales is proposed to describe the transverse and lateral temperature profiles, in which the window characteristic length, effective characteristic width/thickness and the height above the neutral plane are considered in general to reflect temperature profile. The present study provides new observations, experimental data and theoretical analysis of the window-ejected thermal plume temperature profile, which is beneficial for the building facade fire-proof design.

Influence of Wall Heat Flow on Building Thermal Plume under Calm Wind Environment

PIV Measurement and Simulation of Building Thermal Plume under No-wind Conditions

Experimental Study on Thermal Plume Characteristics of Building Façades Based on PIV Technology

Temporal variation of wall flow and its influences on energy balance of the building wall

Flow Patterns and Heat Transfer of an Idealized Square City in Non-Uniform Heat Flux and Different Background Wind Conditions

Experimental Investigation on Lateral Temperature Profile of Window-Ejected Facade Fire Plume with Ambient Wind

An Experimental Study on Vertical Temperature Profile of Facade Fire Plume Ejected from Compartment with an Opening Subjected to External Wind Normal to Facade

Transverse and Lateral Temperature Profiles of the Window-Ejected Thermal Plume along the Facade

Experimental Study on Vertical Temperature of Facade Fire Plume Ejected from Compartment Constrained by Adjacent Single Sidewall

Heat Flux Profile Upon Building Facade with Side Walls Due to Window Ejected Fire Plume: an Experimental Investigation and Global Correlation

Buoyancy Combined with Buildings Layout Effects on the Thermal Diffusion under Background Wind: Wind Tunnel PIV Measurement

Vertical Temperature Profile of Fire-Induced Facade Thermal Plume Ejected from a Fire Compartment Window with Two Adjacent Side Walls

Heat Flux Profile Upon Building Facade Due to Ejected Thermal Plume from Window in A Subatmospheric Pressure at High Altitude

An Experimental Investigation of the External Wind Effects on the Ceiling Temperature Distribution of Fire-Induced Thermal Flow in a Corridor Connected to a Compartment

A data analysis method for detecting wall thermal resistance considering wind velocity in situ

An Experimental Study of the Influence of Environmental Wind on the Smoke Flow Behaviour and Temperature Distribution in Room-Corridor Fire

Experimental Study on the Heat Flux Profile Upon the Building Facade of the Window-Ejected Fire Plume

The Effect of the Sideward Wind on the Temperature Inside a Compartment and the Spill Plume from the Window

Experimental Investigation of Indoor Air Flows in a Model Room

The thermal plume above a standing human body exposed to different air distribution strategies

Hot spots and flow structures around an isolated cuboid building subjected to surface warming: Large eddy simulations and wind tunnel measurements