Experimental study on engineering characteristics of modified expansive soil with silt

TANG Zi-qiong,CHEN Jia-fu,HOU Jue,ZHANG Ding-wen,SUN Hai-jun

DOI: https://doi.org/10.3785/j.issn.2096-7195.2023.02.004

2023-01-01

Abstract:Compaction test, expansive properties test, Atterberg limits test, California bearing ratio test（CBR） and unconfined compression test on modified expansive soil with different proportions of silt were carried out to investigate its engineering characteristics. It is concluded that the addition of silt reduces the hydrophilicity of expansive soil and improves its compaction characteristics. The maximum dry density reaches the peak when the proportion of silt is 40%.The swelling index of the modified soil is significantly reduced, the free expansive rate can be reduced to 24.5%, and the loaded expansive rate is gradually close to zero. With the increase of the proportion of silt, the CBR of the improved soil is significantly increased, and the unconfined compressive strength increases first and then decreases. It can be found that its unconfined compressive strength has a peak value of 0.87 MPa when the proportion of silt is 10%. Combined with the engineering practice of the Liansu expressway project, the uniformity of the mixed materials is improved by adding a small amount of line to the expansive soil to reduce its plasticity and increase its breakability. The laboratory tests were carried out on expansive soil improved by combining 40% silt and 2.5% lime. The results show that the addition of lime improves the unconfined compressive strength of the soil and further inhibits the expansion potential of the soil.