Abstract:<p>For a heat treatment furnace, the precise study of the flow characteristics, combustion and heat transfer in the furnace is essential to know the temperature distribution in a slab during the heating process. In this context several different three-dimensional CFD (Computational Fluid Dynamics) models have been developed to simulate the combustion and heat transfer process in the furnace. These models were developed based on direct fired reheating furnaces with continuous fuel input. In this paper, a novel three-dimensional transient CFD model used to investigate the slab heating characteristics in the heat treatment furnace with pulse combustion was developed. The transient calculation in the furnace was performed based on the steady-state simulation of the furnace temperature, and the movement of slabs on the rollers in the furnace was simulated using dynamic mesh. By comparison, the results from the EDC with two different reaction mechanisms showed good consistency. However, the EDC with the two-step reaction mechanism required one fifth the calculation time of the EDC with the GRI-Mech3.0, and was thus the preferred model. In contrast to direct fired reheating furnaces, the outer radiant tube walls were treated as the coupled boundary conditions in the model to realize indirect heat transfer between the process gas in the furnace and the combustion gas in the radiant tubes. Furthermore, a pulse combustion method was proposed to control the working states of the burners based on UDF (User-Defined Function), in order to realize the pulse combustion process in the heat treatment furnace. By the validation of "Black Box", the temperature variation of the slab and the gas temperature in the furnace predicted by the model agreed well with the experimental results. The simulation revealed that the temperature distribution of the radiant tubes and furnace gas was uniform and the maximum temperature difference on the outer radiant tube walls was less than 84 K. During the slab transient heating process, the slab temperature distribution became more uniform in the soaking zone and the maximum temperature difference along the thickness of the slab was below 13 K at discharge.</p>

Parameter Optimization of Exhaust Heat Shield for High Temperature and Strong Radiation Heat Source

An Adaptive Finite-Element Model For The Behavior Of Uranium Hexafluoride Filled Container In A Fire

Progress of High Heat Flux Component Manufacture and Heat Load Experiments in China

Optimization of Elliptical U-tube Heat Exchanger (EUTHE) for Spray Cooling Based on the Taguchi and CFD Method

Digital strategies to improve the product quality and production efficiency of fluorinated polymers: 2. Heat removal performance of reactor with internal and external cooling systems

Numerical modeling and parameter optimization of the combustion chamber in a tower-type zinc refining furnace

Optimization Study on Shielding Design for Horizontal Ducts of China Advanced Research Reactor

Heat Transfer Analysis and Optimization for Wafer System of Laser Annealing Equipment

Experimental study of the effect of a radiant tube on the temperature distribution in a horizontal heating furnace

Design and optimization of thermal insulation structure for high-temperature pipeline inside the lower tank wall

Numerical investigation and optimization of flat plate transpiration-film combined cooling structure

Modeling approach and numerical analysis of a roller-hearth reheating furnace with radiant tubes and heating process optimization

Numerical analysis of the heat transfer of radiant tubes and the slab heating characteristics in an industrial heat treatment furnace with pulse combustion

Weight Optimizing For Fibrous Thermal Insulations Of Metallic Thermal Protection Systems Uder The Steady Heat Transfer

Experimental study of gas–solid flow over a novel heating surface in a CFB furnace

Numerical Study and Structural Optimization of Water-Wall Temperature-Measurement Device for Ultra-Supercritical Boiler

Optimization of structural parameters of an inner preheating transpiring-wall SCWO reactor

Simulation and Optimization on Radiation Chamber of FF Waste Heat Boiler in Copper Smelter

Coupled heat transfer simulations for evaluation of thermal performance during hydrogen absorption in cylindrical uranium-based hydride beds

Numerical Simulation of Flow and Temperature Fields in the Radiation Chamber of a Waste-Heat Boiler for Copper Flash Smelting

Numerical study and orthogonal analysis of optimal performance parameters for vertical cooling of sintered ore