Abstract:At present, researchers in the field of pipeline inspection focus on pipe wall defects while neglecting pipeline defects in special situations such as welds. This poses a threat to the safe operation of projects. In this paper, a multi-node fusion and modal projection algorithm of steel pipes based on guided wave technology is proposed. Through an ANSYS numerical simulation, research is conducted to achieve the identification, localization, and quantification of axial cracks on the surface of straight pipelines and internal cracks in circumferential welds. The propagation characteristics and vibration law of ultrasonic guided waves are theoretically solved by the semi-analytical finite element method in the pipeline. The model section is discretized in one-dimensional polar coordinates to obtain the dispersion curve of the steel pipe. The T(0,1) mode, which is modulated by the Hanning window, is selected to simulate the axial crack of the pipeline and the L(0,2) mode to simulate the crack in the weld, and the correctness of the dispersion curve is verified. The results show that the T(0,1) and L(0,2) modes are successfully excited, and they are sensitive to axial and circumferential cracks. The time–frequency diagram of wavelet transform and the time domain diagram of the crack signal of Hilbert transform are used to identify the echo signal. The first wave packet peak point and group velocity are used to locate the crack. The pure signal of the crack is extracted from the simulation data, and the variation law between the reflection coefficient and the circumferential and radial dimensions of the defect is calculated to evaluate the size of the defect. This provides a new and feasible method for steel pipe defect detection.

Ultrasonic Testing of Defects in Pipeline Based on Image Characteristics of TOFD Circumferential Scan

Evaluation of Pipe Axial Defeat Through the Use of Ultrasonic Guided Wave and Matching Pursuit

Quantitative Detection of Shallow Subsurface Cracks in Pipeline with Time-of-flight Diffraction Technique

Reduction of Layered Dead Zone in Time-of-Flight Diffraction (TOFD) for Pipeline with Spectrum Analysis Method

Ultrasonic Guided Wave-Based Circumferential Scanning of Plates Using a Synthetic Aperture Focusing Technique

Shallow Buried Defect Testing Method Based on Ultrasonic TOFD

Study of PA-TOFD Inspection based on Numerical Simulation

Quantitative Detection of Shallow Subsurface Defects by Using Mode-Converted Waves in Time-of-Flight Diffraction Technique

Deconvolution Imaging of Weak Reflective Pipe Defects Using Guided-Wave Signals Captured by a Scanning Receiver

An Enhanced Long-Range Guided-Wave Pipe Inspection Method Based on Local Axial 2-D Signal Acquisition and Processing.

Location Detection and Numerical Simulation of Guided Wave Defects in Steel Pipes

Ultrasonic TOFD detection of near surface defects based on adaptive filtering

Imaging and defects identification system for ultrasonic TOFD test

Characteristic and Recognition of Ultrasonic TOED Signal and Image for Planar Defect

High Resolution Tomography of Pipeline Using Multi-Helical Lamb Wave Based on Compressed Sensing

Enhancement of Defect Image in Ultrasonic TOFD Detection Based on Phase Coherence Imaging

Circumferential Ultrasonic Testing for Ultra-high Pressure Vessels and Pipes(2)

Simulation Research on Defect Detection in Station Process Pipelines Using Ultrasonic Guided Waves

Development and application of ultrasonic TOFD testing system with USB

Ultrasonic Nondestructive Testing Accurate Sizing and Locating Technique Based on Time-of-Flight-Diffraction Method

Signal Characteristic of Ultrasonic TOFD Testing for Aluminum Alloy Weld