Abstract:In engineering fields, the breakdown of a critical system can result in irreparable consequences, including task failures and even heavy casualties. Equipping systems with protective devices is an effective method to alleviate system failure risk in practical applications. However, existing research primarily focuses on single-component systems supported by a binary-state protective device. Moreover, existing studies assume that system deterioration is only caused by external shocks. For the first time, a multi-state k-out-of-n: F system containing m subsystems with multi-state protective devices is established in this study. In the proposed model, the deterioration of system and protective devices is caused not only by external shocks, but also by internal degradation. In the j-th subsystem, the corresponding protective device activates to work when the number of failed components reaches a threshold. During the operation of the protective device, the degradation rates of components, as well as the impacts and probabilities of adverse shocks on them decrease. The j-th subsystem breaks down once the number of failed components exceeds a critical value kj. Based on the number of failed subsystems, the entire system is categorized into multiple states. Ultimately, the entire system fails when the number of failed subsystems reaches a predetermined value. A combination of the Markov process imbedding approach and finite Markov chain imbedding approach is employed to derive the probabilistic indices for the proposed system. Furthermore, a case study based on an aero-engine turbine system is presented to validate the proposed reliability model.

Availability for multi-component k -out-of- n : G warm-standby system in series with shut-off rule of suspended animation

1-Out-of-n Multi-State Standby Systems with State-Dependent Random Replacement Times

Reliability Assessment and Activation Sequence Optimization of Non-Repairable Multi-State Generation Systems Considering Warm Standby.

Reliability of Multi-State Systems with Free Access to Repairable Standby Elements

Availability modeling and optimization of dynamic multi-state series–parallel systems with random reconfiguration

Time-to-state and Availability Assessment of Multi-State Weighted K-out-of-n: G Systems

Reliability Analysis of Standby Systems with Multi-State Elements Subject to Constant Transition Rates.

Availability Evaluation and Design Optimization of Multi-State k-out-of-n: G Systems With Random Performance Requirements

Reliability evaluations for a multi-state k-out-of-n: F system with m subsystems supported by multiple protective devices

1-out-of-n standby systems with storages and activation moment-dependent component operation time limit

Reliability and Optimization for k-out-of-n: G Mixed Standby Retrial System with Dependency and J-Vacation

Definitions of Generalized Multi-Performance Weighted Multi-State K¯-out-of-n System and Its Reliability Evaluations

Optimal Inspection and Maintenance for a Repairable K-out-of-n: G Warm Standby System

Cost analysis of a repairable warm standby k-out-of-n: G and 2-out-of-4: G systems in series configuration under catastrophic failure using copula repair

Universal generating function based recursive algorithms for reliability evaluation of multi-state weighted k-out-of-n systems

Reliability evaluation of power systems with multi-state warm standby and multi-state performance sharing mechanism

A Multi-State Model for Wind Farms Considering Operational Outage Probability

Reliability analysis and state transfer scheduling optimization of degrading load-sharing system equipped with warm standby components

Efficient reliability approximation for large k -out-of- n cold standby systems with position-dependent component lifetime distributions

Reliability evaluation of a k-out-of-n(G)-subsystem based multi-state phased mission system with common bus performance sharing subjected to common cause failures