Abstract:A non‐iterative contact geometry algorithm with the consideration of wheel‐rail elastic contact is proposed. The algorithm independently calculates the left and right wheel‐rail gaps without iteration, which overcomes the limitation of simultaneous contact on both rails. Moreover, it converts rail elastic deformation and track irregularities into the lateral displacement of wheel, avoiding the real‐time calculation of the rail spatial coordinates. To ensure a more accurate simulation of the wheel‐rail contact state in vehicle‐track interaction, a non‐iterative contact geometry determination algorithm is proposed. This algorithm decouples lateral movement and roll, independently calculates the minimum wheel‐rail gap on both sides, and overcomes the limitation of simultaneous wheel‐rail contact on both sides. It can be applied to single‐side and two‐side wheel‐rail separation problems. Additionally, by converting track irregularity and rail deformation into the reverse displacement of the wheel, it avoids real‐time calculation of the wheel‐rail spatial position, thereby improving calculation efficiency. The effectiveness of the algorithm is verified through Universal Mechanism software and field measurements. Subsequently, the influence of the measured wheel‐rail profile, rail cant, and rail gauge on the wheel‐rail contact characteristics is analyzed. Finally, vehicle shaking caused by track irregularity and wheel‐rail contact is examined from the perspective of wheel‐rail matching. The study demonstrates that the non‐iterative algorithm is suitable for online simulation by pre‐processing the contact geometry parameters. When the track gauge and rail cant increase, the distribution of wheel‐rail contact points becomes more concentrated. Furthermore, when the excitation frequency of wheel‐rail matching is close to the track irregularity excitation frequency, it causes vibration amplification, resulting in lateral vehicle shaking.

Influence of Wheel-Rail Contact Algorithms on Running Safety Assessment of Trains under Earthquakes

Running Safety Assessment Method of Trains under Seismic Conditions Based on the Derailment Risk Domain

A Non‐Iterative Wheel‐Rail Contact Geometry Determination Algorithm and Its Application

Post-earthquake Train Operation Safety Assessment Model Based on Machine Learning

Seismic Running Safety Assessment for Stochastic Vibration of Train–bridge Coupled System

Research on wheel–rail impact dynamics due to combined rail weld irregularities and polygonal wheel effects considering 3D contact geometry

The role of 3D contact geometry in modeling dynamic wheel-rail interaction at short-wave irregularities on rail surface

A Semi-Online Spatial Wheel-Rail Contact Detection Method

Seismic-Induced Geometric Irregularity of Rail Alignment under Transverse Random Earthquake

Study On Dynamical Behavior Of Crh Vehicle Based On A New Wheel-Rail Contact Model

Study on train running safety in railway switches and sharp curves considering wheel wear evolution

Study of post-earthquake train running performance considering earthquake-induced track irregularity

Influence of Random Multi-Point Seismic Excitations on the Safety Performance of a Train Running on a Long-Span Bridge

Numerical Investigation into the Effect of Geometric Gap Idealisation on Wheel-Rail Rolling Contact in Presence of Yaw Angle

Running Safety of High-Speed Railway Vehicles on the Elastoplastic Track-Subgrade-bridge System under Near-Fault Pulse-Type Earthquakes

Analysis of the Wheel/rail Surfaces Deformation Characteristics Based on Different Micro-contact Models

Running safety assessment of a train traversing a three-tower cable-stayed bridge under spatially varying ground motion

An Innovative Contact Partition Model for Wheel/Rail Normal Contact

Safety and Comfort Assessment of a Train Passing over an Earthquake-Damaged Bridge Based on a Probability Model

Calculation of Influencing Number of Wheel-Rail Non-Hertz Contact Using Finite Element Method

Comparison of calculation methods for wheel–switch rail normal and tangential contact