Abstract:Sound propagation in shallow water is significantly influenced by geoacoustic properties. Estimating these geoacoustic parameters is essential for sound field analysis and sonar performance assessment. As a common practice, the seafloor is often treated as a single-layer or two-layer range-independent geoacoustic model to reduce the number of involved parameters. However, acoustic parameters inverted through these two geoacoustic models are typically limited in their applicability to a specific frequency range, posing challenges when applied across a broader frequency range. A range-dependent multi-layer geoacoustic model based on experimental measurements obtained with a sub-bottom profiler is proposed in this study. The inversion scheme combines three inversion methods to estimate geoacoustic parameters, considering the different sensitivities of geoacoustic parameters to different physical parameters within the acoustic field. Firstly, modal dispersion is used to invert the geoacoustic parameters of each layer, with the dispersion curve obtained through warping transform and the Wigner-Ville distribution. After that, both the localization using matched field processing and the dispersion curve fitting demonstrate the effectiveness of the inversion results for each layer, despite the peak of the probability distribution of sound speed in the first layer is broader than in others. Subsequently, matched field processing is employed to invert the geoacoustic parameters of the first layer. This method is based on the theory that as frequency increases, the depth of sound rays penetrating the seabed decreases, revealing changes in the first layer's sound speed with the seabed depth. Finally, bottom attenuation coefficients at different frequencies are inverted by the transmission loss (TL), and a fitting relationship between the attenuation coefficients and the frequencies is derived.In the discussion, the inversion results obtained using the range-dependent multi-layer geoacoustic model are compared with results estimated by the single-layer geoacoustic model. The findings indicate that the transmission loss (TL) error calculated by the range-dependent multi-layer geoacoustic model in this study is smaller than that calculated by the single-layer geoacoustic model, especially in the lower frequency band. The range-dependent multi-layer geoacoustic model proves to be suitable for a broader frequency range, providing better precision in explaining various acoustic phenomena.

Parameter Inversion and Target Localization in Layered Media Containing Solids Based on Acoustic Ray Tracing Method

Inversion of Ocean Environmental Variations Via Time-Reversal Acoustics

Multilayered Media Parameter Inversion Based on Reflected Trajectory Fitting Method

Study of Acoustic Tomography Based on Data Assimilation for Shallow Water Environments

Experimental Investigation of Detection and Location of a Target in Three-Layered Media Using the TR–RTM Mixed Method

Marchenko Equation for Time Reversal Imaging in an Underwater Acoustic Waveguide

Effects of parameters of acoustic field to detection and location of targets using TR-RTM mixed method

Detection and Location of a Target in Layered Media by Snapshot Time Reversal and Reverse Time Migration Mixed Method

Detection and Location of a Target in Layered Media Without Prior Knowledge of Medium Parameters

Inversion for Acoustic Parameters of Plastic Polymer Target in Water

Experimental Investigation of the Detection and Location of a Target in Layered Media by Using the TR-RTM Mixed Method

Target-detection and Localization in Multilayered Media Through Mixed TR–RTM Method

Material parameter inversion method based on AE detection and global matrix

Unified Underwater Acoustic Localization and Sound Speed Estimation for an Isogradient Sound Speed Profile

Numerical and Experimental Analysis of a Focused Reflected Wave in a Multi-Layered Material Based on a Ray Model.

Shallow water low frequency inversion on basis of range-dependent multi-layer geoacoustical model

Parameter Inversion by a Modified Reflected Signal Reconstruction Method for Thin-Layered Media

Layered Media Parameter Inversion Based on Common Middle Point Model and Pattern Search Method

Layer-Averaged Water Temperature Sensing in a Lake by Acoustic Tomography with a Focus on the Inversion Stratification Mechanism

Inversion method of extraction of acoustical characteristics about vertical ocean temperature structure

Inversion experimentation of vertical ocean temperature structure based on acoustical signal