High-heat and UV-barrier Poly(lactic Acid) by Microwave-Assisted Functionalization of Waste Natural Fibers
Lv Ke,Han Shang,Mengke Tang,Xinyu Li,Liang Jiang,Sijia Lu,Daoyuan Tang,Donghui Huang,Jintuo Zhu,Changhui Liu,Huan Xu,Xinjian He,Jiefeng Gao
DOI: https://doi.org/10.1016/j.ijbiomac.2022.08.114
IF: 8.2
2022-01-01
International Journal of Biological Macromolecules
Abstract:The application of poly(lactic acid) (PLA) in the packaging area is frequently dwarfed by the inadequate gas/ water barrier properties, low heat resistance and high UV transmittance. Herein, an environmentally friendly and high-efficiency microwave-assisted functionalization (MAF) approach was proposed to aqueous grafting waste bamboo fibers with the bridging agent. It permitted significant promotion of interfacial interactions between the MAF bamboo fibers (MAFBs) and neighboring PLA chains, contributing to uniform dispersion and intimate interphase. Featuring the morphological features, the MAFB-reinforced (5, 10 and 20 wt%) PLA biocomposites achieved an unexpected combination of high mechanical properties, exceptional resistance to heat deflection and UV irradiation, and excellent water barrier performance. Upon addition of only 5 wt% MAFBs, the tensile strength and toughness of PLA composite films were increased to 46.5 MPa and 0.6 MJ/m3, increasing over 52 % and nearly 107 % compared to those of the counterpart loaded pristine bamboo fibers (PBFs), respectively. This was favorably accompanied by the remarkably reduced water vapor permeability, falling down to the lowest value of 3.5 x 10-11 g center dot m/Pa center dot s center dot m2 for PLA/MAFB (80/20) with a decrease of nearly 79 % compared to the counterpart. It is of interest to note the MAFB-enabled nearly 100 % UV-blocking ratio for PLA loaded 10 and 20 wt% fibers, as well as excellent resistance to heat deflection even at high temperatures like 120 degrees C. This effort paves the way to multifunctional natural fibers with high affinity to PLA for elegant implementation of high-heat and UV-resistant packaging materials in an ecofriendly manner.