Abstract:The alloy-type material Sb is widely used in the anode materials of lithium-ion batteries (LIBs) due to its high theoretical specific capacity. However, its serious volume expansion problem during alloying/dealloying of Li+ limits its practical application. In this work, C-Sb composite was constructed as anode material of LIBs by electrospinning route for the first time, Sb was introduced into the polyacrylonitrile-based hard carbon and coal tar pitch-based soft carbon composite amorphous carbon fiber with a diameter of 300–600 nm, which realized high cycling stability. The C-Sb-2 (the mass ratio of polyacrylonitrile to Sb source is 1:2) electrode displayed charge capacities of 1098.5, 930.3, 841.7, 753.5, 643.9 and 545.8 mAh·g−1 at 0.1, 0.2, 0.3, 0.5, 1 and 2 A·g−1, respectively. And when the current density returned to 0.1 A·g−1, the charge capacity was 939.3 mAh·g−1, revealing good stability and reversibility. The introduction of Sb into the amorphous carbon improved its conductivity and addressed the volume expansion issue of high specific capacity Sb during charge/discharge. Ex-situ XRD analysis confirmed the high reversibility of the C-Sb-2 during charging and discharging. Density functional theory (DFT) calculations revealed the gradual enhancement of the interface interaction between SbxLiy and amorphous carbon (AMC) with increasing lithium content, contributing to the anchoring of alloy nanoparticles on the AMC surface and buffering the volume change of the alloy. Moreover, the gradual lithiation of Sb facilitated the electron transfer from SbxLiy to AMC. These findings hold promise for designing lithium storage materials with exceptional performance, highlighting the potential of C-Sb composites as anode materials for efficient next-generation lithium storage.

Combine Natural Stibnite with Bio-Carbon: A High-Capacity Composite Anode Material for Lithium-Ion Battery

Sb2S3 nanorods/porous-carbon composite from natural stibnite ore as high-performance anode for lithium-ion batteries

Amorphous C/SbSx composite from natural stibnite as low cost and high performance lithium/sodium-ion battery anodes

Natural Nitrogen-Doped Multiporous Carbon from Biological Cells As Sulfur Stabilizers for Lithium–sulfur Batteries

Natural nori-based porous carbon composite for sustainable lithium-sulfur batteries

Sustainable, Inexpensive, Naturally Multi-Functionalized Biomass Carbon for Both Li Metal Anode and Sulfur Cathode

Bio-enzymatic synthesis of nitrogen-doped porous carbon/SnO2/carbon microspheres as high-performance composite materials for lithium-ion and sodium-ion batteries

Biomass-Derived 3D Interconnected Porous Carbon-Encapsulated Nano-FeS2 for High-Performance Lithium-Ion Batteries

Homogeneous Distributed Natural Pyrite-Derived Composite Induced by Modi-Fied Graphite As High-Performance Lithium-Ion Batteries Anode

In Situ Embedment of ZnS Nanocrystals in High Porosity Carbon Fibers as an Advanced Anode Material for Efficient Lithium Storage

Fe-N-C decorated fibrous network-wrapped biomass SiOx/C with gradient conductive structure for high performance Li-ion battery anodes

Facile Approach to an Advanced Nanoporous Silicon/carbon Composite Anode Material for Lithium Ion Batteries

Investigation and Optimization of Electrochemical Lithium Storage in Natural Stibnite

Well-dispersed Sb Particles Embedded on N-doped Carbon Nanofibers Toward High-Performance Li-ion Battery

Confining Sulfur in N-Doped Porous Carbon Microspheres Derived from Microalgaes for Advanced Lithium-Sulfur Batteries.

Multilayer Reduced Graphene and Silicon Composite for Improving Stability of Anode of Lithium-Ion Batteries

Developing bio‐carbon matrices for the encapsulation of silicon nanoparticles for high‐performance lithium‐ion battery anode materials

Structure Design and Performance of the Graphite/Silicon/Carbon Nanotubes/Carbon (GSCC) Composite as the Anode of a Li-Ion Battery

High-performance Sb2S3/Sb Anode Materials for Li-ion Batteries

Li2S@C/CNT Composite Cathode with Botryoidal Conductive Network for Advanced Lithium–sulfur Batteries

A Superb 3D Composite Lithium Metal Anode Prepared by In-Situ Lithiation of Sulfurized Polyacrylonitrile