Effects of Spacing Distance and Heat Release Rate on Flame Merging and Burning Characteristics of Two Ultra-Long Thin Line Fires
Huang Xinjie,Shao Yu,Hu Junjie,Zhang Yang,Zhu Haowei,Liu Chunlin,Wang Changlong,Zhang Pengyuan
DOI: https://doi.org/10.1007/s10973-022-11600-4
IF: 4.755
2022-01-01
Journal of Thermal Analysis and Calorimetry
Abstract:In this paper, the flame merging and burning characteristics of two ultra-long thin line fires (length 1000 mm, width 3 mm) with aspect ratio of 333:1 are studied at different spacing distances ( $$S$$ = 2, 4, 6, 10, 12, 18, 20, 26, 30, 36, 40 and 50 cm) and heat release rates ( $$\dot{Q}$$ = 19.4, 25.7, 32.7, 38.9 and 43.6 kW). The two parallel burners are fueled by propane. The values of $$S/L_{{{\text{fs}},\;S = 0}} = 0.8$$ for the critical merging position and $$S/W = 1000$$ for the critical interaction position are both correspondingly larger. It can be considered as that, the larger aspect ratio will promote the flame merging interaction and increase flame merging probability $$P_{{\text{m}}}$$ .The flame structure shows the “U” shape on the lengthwise direction, and the side flame height $$L_{{{\text{fs}}}}$$ and the middle flame height $$L_{{{\text{fm}}}}$$ are firstly introduced in order to reveal the three-dimensional effect. A segmental correlation of dimensionless flame height $$L_{{{\text{fs}}}} /L_{{{\text{fm}}}}$$ with $$S/Z_{{\text{c}}}$$ is well developed, with the critical value $$S/Z_{{\text{c}}} = 4$$ . A side flame height $$L_{{{\text{fs}}}}$$ prediction model is also derived theoretically, which shows a good agreement with the experiments value. Meanwhile, it is found that, the flame inclination angle $$\theta$$ increases with $$S$$ ,due to the competition of air entrainment in the additional region. A side flame length $$Z_{{{\text{fs}}}}$$ model based on $$\theta$$ and $$L_{{{\text{fs}}}}$$ is proposed, which will extend the flame height model. This work provides the essential knowledge on the side detailed flame structure including the important parameters of $$L_{{{\text{fs}}}}$$ , $$\theta$$ and $$Z_{{{\text{fs}}}}$$ related with $$S$$ and $$\dot{Q}$$ .