Abstract:Abstract Foam fracturing is an effective method for the development of unconventional reservoirs. However, due to lamellar film, high pressure differences within foam films, and the strong diffusivity of the internal phase, foam is prone to suffering from unstable phenomena such as rupture, drainage, disproportionation, etc., thus leading to uncontrollable foam flow behavior in the tube and formation. In this work, cellulose nanofibrils (CNFs) were used to enhance foam fracturing fluid. The target is not only to obtain a stable foam system, but also to control its rheology, proppant-carrying and leak-off behavior. The stability of the N2 foam fracturing fluid with CNFs was firstly explored via static tests by measuring its foam volume and liquid drainage. Then, the viscosity of foam fracturing fluids with different foam quality was measured using a tube viscometer under conditions of use, to evaluate the rheology of foam with CNFs. Subsequently, the proppant-carrying capacity was evaluated by observing suspension state of proppants in foam over time. The microscopic images of the foam with proppants were collected to analyze the interaction between bubbles and proppant. Finally, the dynamic filtration behavior and core damage of foam with CNFs were investigated by using a dynamic filtration apparatus. The results of the static tests showed that the stability of foam was significantly enhanced by the addition of CNFs, and the liquid drainage and gas diffusion could be effectively inhibited. Upon foam evolution, bare surfactant foam formed a polyhedral structure rapidly, while the CNFs enhanced foam maintained spherical and dense for a long time. The viscosity of foams with and without cellulose nanofibrils showed a shear thinning behavior. With the addition of CNFs, the viscosity of foam was improved by 3 - 6 times compared with bare surfactant foam and its value was increased with foam quality changing from 60% to 80%. The results of proppant-carrying tests indicated that the proppants suspension in foam was improved obviously as the cellulose nanofibrils were added. For CNFs-stabilized foam, the aqueous film of bubbles became thicker and the mechanical strength of foam structure was improved, thus enhancing the proppant suspension in the foams. Moreover, the filtration control performance of CNFs foam was also improved compared with bare surfactant foam. The filtration coefficient of CNFs foam fracturing fluid decreased with increasing CNFs concentration at a filtration pressure difference of 3 MPa, and core damage was maintained at a relatively low level. Additionally, the filtration coefficient of CNFs-stabilized foam and its core damage could be reduced with the increase of foam quality from 60% to 80%. The stability, rheology, proppant-carrying and dynamic filtration control of foam fracturing fluid enhanced by cellulose nanofibrils were explored in this work. The results show that the addition of CNFs effectively improves the stability of the foam, thus enabling the rheology, proppant-carrying and the dynamic filtration to be well controlled, which provides a high-performance and eco-friendly foam fracturing fluid.

Experimental Study of the Rheology of Cellulose Nanocrystals-Enhanced C22-tailed Zwitterionic Wormlike Micelles

Experimental study of foam stability and interfacial behaviour of cellulose nanocrystals-enhanced C22-tailed zwitterionic betaine surfactant

Rheology and Dynamic Filtration of Foam Fracturing Fluid Enhanced by Cellulose Nanofibrils

Influence of Cellulose Nanoparticles on Rheological Behavior of Oil Well Cement-Water Slurries

Cellulose nanoparticles as modifiers for rheology and fluid loss in bentonite water-based fluids.

Rheological Properties and Formation Dynamic Filtration Damage Evaluation of a Novel Nanoparticle-Enhanced VES Fracturing System Constructed with Wormlike Micelles

Cellulose Nanocrystals and Polyanionic Cellulose As Additives in Bentonite Water-Based Drilling Fluids: Rheological Modeling and Filtration Mechanisms

Effect of salt ions (Na+, Ca2+ and Mg2+) and EOR anionic and nonionic surfactants on the dispersion stability of cellulose nanocrystals

Experimental Study on the Stability of a Novel Nanocomposite-Enhanced Viscoelastic Surfactant Solution as a Fracturing Fluid under Unconventional Reservoir Stimulation

Preparation and Characterization of Responsive Cellulose-Based Gel Microspheres for Enhanced Oil Recovery

Cellulose Nanofibers as a Modifier for Rheology, Curing and Mechanical Performance of Oil Well Cement

Study of cellulose nanocrystals -enhanced natural gas foam performance and profile control & oil displacement mechanism

Cellulose Nanofibrils As Rheology Modifier and Fluid Loss Additive in Water-Based Drilling Fluids: Rheological Properties, Rheological Modeling, and Filtration Mechanisms

Preparation and performance evaluation of viscoelastic zwitterionic surfactant for cleaning fracturing fluids

Polymer induced liquid crystal phase behavior of cellulose nanocrystal dispersions

Construction and mechanism study of clean N 2 foam fracturing fluid stabilized by viscoelastic surfactant in concentrated brines for unconventional oil and gas

Rheology, Curing Temperature and Mechanical Performance of Oil Well Cement: Combined Effect of Cellulose Nanofibers and Graphene Nano-Platelets

Rheological Aspects of Cellulose Nanomaterials: Governing Factors and Emerging Applications

Nanocellulose as a New Degradable Suspension Additive for High-Density Calcium Brines

Improved Gelation Performance of an Acidic Low-Polymer Loading Zirconium Cross-Linked CMHPG Fracturing Fluid by Surface Functionalized 1T-Phase Molybdenum Disulfide Nanosheets

Rheological properties of magnetorheological suspensions stabilized with nanocelluloses