Abstract:Fracturing behavior of ductile multi-flawed rock mass is very different from those of brittle multiflawed rock mass. However, there is a very vague distinction of the fracture mechanism of ductile mull-flawed rock mass from that of brittle mull-flawed rock mass due to the absence of quality experimental data. To evaluate the fracturing behavior and further reveal the failure mechanism of brittle and ductile mull-flawed rock masses, a comparison study on brittle and ductile laboratory rock-like specimens that contain nine pre-existing flaws subjected to uniaxial compression is conducted. The advanced optical technique, Digital Image Correlation (DIC), is adopted to capture the real-time displacement and strain fields on the surface of the rock-like specimens. The fractal dimension estimation method is introduced to quantitatively track the fracture process. The fracture process, the crack coalescence mode and the fracturing mechanism are obtained as well as the stress-strain response. For ductile mull-flawed rock-like specimens, four crack initiation modes and nine types of crack coalescence are observed. For brittle multiflawed rock like specimens, four crack initiation modes and eight types of crack coalescence are observed. Comparison of fracturing behavior indicates that crack initiation mode transforms from shear crack to tensile crack as the brittleness index increases; the coalescence mode transforms from shear crack coalescence to the coalescence of tensile crack and shear crack; then to the tensile crack coalescence as the brittleness index increases. Observations on the ultimate failure modes indicate that the failure mode transforms from shear failure to the mixed tensionshear failure, then to splitting failure as the brittleness index increases. Most macrocracks in brittle mull-flawed rock-like specimens develop from crack coalescence occurring in a "columnar" pattern, while most macrocracks in ductile mull-flawed rock-like specimens develop from shear cracks. Moreover, the effects of the brittleness index on the complete stress-strain curve, the crack initiation stress and the peak strength are also investigated in detail.

Representation of Brittle Rock Plasto-Elastic Behaviour Based on Tangible Cracks in Discontinuous Deformation Analysis

Improved Discontinuous Deformation Analysis Method for Modeling Tensile Cracking in Quasi-Brittle Materials

A Cohesive Model-Based Nonlinear Discontinuous Deformation Analysis for Tensile Fracture in Geotechnical Materials

A new method to model the non-linear crack closure behavior of rocks under uniaxial compression

Cracking Behavior and Acoustic Emission Characteristics of Rock Containing a Single Preexisting Flaw

Numerical Analysis on Nonlinear Deformation Behavior of Rock Considering Compaction of Pores

Damage Constitutive Model of Brittle Rock Considering the Compaction of Crack

Discrete Element Study on the Mechanical Behavior of Flawed Rocks under Dynamic Compression

A Unified Analytical Method Calculating Brittle Rocks Deformation Induced by Crack Growth

Crack-closure behavior and stress-sensitive wave velocity of hard rock based on flat-joint model in particle-flow-code (PFC) modeling

Study on Microcrack Growth-Based Dynamic Compressive Mechanical Properties in Brittle Rocks

A Combined Continuous-Discontinuous Approach for Failure Process of Quasi-Brittle Materials

Cracking Evolution and Failure Mechanism of Brittle Rocks Containing Pre-Existing Flaws under Compression-Dominating Stresses: Insight from Numerical Approach

MODELING OF DEFORMATION-CRACKING PROCESSES OF GEOMATERIALS BASED ON A CONTINUUM-DISCONTINUUM METHOD: A CASE STUDY OF COMPACT TENSION TEST

A nonlinear constitutive model for whole stress–strain behaviors of compressed rocks incorporating crack closure effect

Particle Discontinuous Deformation Analysis of Static and Dynamic Crack Propagation in Brittle Material

SIMULATION OF ROCK CRACK PROPAGATION USING DISCONTINUOUS DEFORMATION ANALYSIS METHOD

Numerical Investigation of Damage Evolution and Localized Fracturing of Brittle Rock in Compression

An Interacting Wing-Crack Based Semi-Analytical Meso-Scale Model for Describing Elasto-Plastic Damage Behavior of Brittle Rocks

Understanding the Fracture Behavior of Brittle and Ductile Multi-Flawed Rocks by Uniaxial Loading by Digital Image Correlation

Discontinuous deformation analysis (DDA) simulations of crack propagation, branching and coalescence in brittle materials under dynamic loading