Abstract:MXenes are promising cathode materials for aqueous zinc-ion batteries (AZIBs) owing to their layered structure, metallic conductivity, and hydrophilicity. However, they suffer from low capacities unless they are subjected to electrochemically induced second phase formation, which is tedious, time-consuming, and uncontrollable. Here we propose a facile one-step surface selenization strategy for realizing advanced MXene-based nanohybrids. Through the selenization process, the surface metal atoms of MXenes are converted to transition metal selenides (TMSes) exhibiting high capacity and excellent structural stability, whereas the inner layers of MXenes are purposely retained. This strategy is applicable to various MXenes, as demonstrated by the successful construction of VSe2@V2CTx, TiSe2@Ti3C2Tx, and NbSe2@Nb2CTx. Typically, VSe2@V2CTx delivers high-rate capability (132.7 mA h g-1 at 2.0 A g-1), long-term cyclability (93.1% capacity retention after 600 cycles at 2.0 A g-1), and high capacitive contribution (85.7% at 2.0 mV s-1). Detailed experimental and simulation results reveal that the superior Zn-ion storage is attributed to the engaging integration of V2CTx and VSe2, which not only significantly improves the Zn-ion diffusion coefficient from 4.3 × 10-15 to 3.7 × 10-13 cm2 s-1 but also provides sufficient structural stability for long-term cycling. This study offers a facile approach for the development of high-performance MXene-based materials for advanced aqueous metal-ion batteries.

In Situ Selenization of Ti3C2TX Assisted by Cu2+with Superior Performance for Aluminum Ion Batteries

Two-dimensional composite of D-Ti<sub>3</sub>C<sub>2</sub>T<i><sub>x</sub></i>@S@TiO<sub>2</sub> (MXene) as the cathode material for aluminum-ion batteries

Confining Homogeneous Ni0.5Co0.5Se2 Nanoparticles in Ti3C2Tx MXene Architectures for Enhanced Sodium Storage Performance

Electrochemical Performance and Cu2+ Modification of Nickel Metal Organic Framework Derived Tellurides for Application in Aluminum Ion Batteries

Construction of Solid Solution Sulfide Embedded in MXene@N-doped Carbon Dual Protection Matrix for Advanced Aluminum Ion Batteries

Metal–organic Framework-Derived CuTe@porous Carbon Composites As Novel Cathodes for Aluminum Ion Batteries

Confining homogeneous Ni0.5Co0.5Se2 nanoparticles in Ti3C2T MXene architectures for enhanced sodium storage performance

Ti3C2T X MXene Decorated with Sb Nanoparticles As Anodes Material for Sodium-Ion Batteries

In Situ Construction of Bimetallic Selenides Heterogeneous Interface on Oxidation-Stable Ti3C2Tx MXene Toward Lithium Storage with Ultrafast Charge Transfer Kinetics

Iodine-functionalized 3D MXene-I-Cu 2 Se, prepared via Lewis acid etching, achieves superior sodium/potassium/aluminum storage performance

Hierarchically Structured Ti3C2Tx MXene Paper for Li-S Batteries with High Volumetric Capacity

Double-confined nanoheterostructure Sb/Sb2S3@Ti3C2Tx@C toward ultra-stable Li-/Na-ion batteries

Surface Selenization Strategy for V 2 CT x MXene toward Superior Zn-Ion Storage

Few-layered Ti<sub>3</sub>C<sub>2</sub> MXene anchoring bimetallic selenide NiCo<sub>2</sub>Se<sub>4</sub> nanoparticles for superior Sodium-ion batteries

SnSe quantum dots Anchored on Few-layered Ti3C2 as Anodes for Sodium Ion Batteries with Enhanced Cycle Stability

Coupling ultrafine SiO2 nanoparticles with three-dimensional porous Ti3C2Tx MXene as anode materials for high-performance lithium-ion batteries

Effects of Multiple Ion Reactions based on a CoSe2/MXene Cathode in Aluminum‐Ion Batteries

MXenes@Te As a Composite Material for High-Performance Aluminum Batteries

Hierarchically structured Ti3C2T MXene paper for Li-S batteries with high volumetric capacity

Controlled Synthesis of Alkalized Ti3C2 MXene-supported Β-Feooh Nanoparticles As Anodes for Lithium-Ion Batteries

Few-layered Ti3C2 MXene anchoring bimetallic selenide NiCo2Se4 nanoparticles for superior Sodium-ion batteries