Abstract:An additional transverse electromagnetic moment caused by the inclination of the rotor of the permanent magnet synchronous motors in electric vehicles is modeled based on Maxwell stress tensor method. The model of this moment is suitable for the case of pole-pair number larger than 3 and is independent of time; its nonlinearity results in multiple equilibrium points of the conservative generalized force: an isolated equilibrium point and a continuum of equilibrium points. The continuum is symmetric with respect to the isolated equilibrium point; a pitchfork bifurcation occurs as the system stiffness of the rotor in the non-inclined state passes through zero. When static angle eccentricity is introduced, the symmetry is lost and the continuum degrades into two unstable equilibrium points. This parameter leads to a generic bifurcation with defect. However, considering it as a bifurcation parameter, a pair of saddle-node bifurcations appears. Eigenvalue-based stability analysis and center manifold theorem are employed to determine the stabilities of the multiple equilibrium points. The frequency characteristics of the forced response caused by the static angle eccentricity are developed by harmonic balance method, and the stability of the steady-state solution is studied with Routh–Hurwitz criterion in a rotating system. The frequency response curve generally passes through all the equilibrium points. For a disk-shaped rotor, the frequency characteristics exhibit hardening and the solution has the same stability as the equilibrium point in the same branch. For a cylindrical rotor, the characteristics show softening and only the solution running near the equilibrium point has the same stability as the equilibrium point in the same branch. Furthermore, there is a frequency band in which the forced response is globally unstable. However, for comparatively large damping, large inertia ratio, small stiffness ratio and small static angle eccentricity, the frequency characteristics of a cylindrical rotor are similar to those of a disk-shaped rotor. The globally unstable frequency band diminishes and then vanishes. All of the solutions have the same stability in a branch.

Dynamic Characteristics Analysis of Rotor-Bearing System Considering Bearing Clearance and Hybrid Eccentricity

Dynamic modeling and vibration response analysis of high speed motorized spindle

Vibration characteristics analysis of a rotor for a permanent magnet motor with Air-Gap Eccentricity

Modeling a Two-Span Rotor System Based on the Hamilton Principle and Rotor Dynamic Behavior Analysis

Influence of Rotor Eccentricity on Electromagnetic Vibration and Noise in Permanent-Magnet Synchronous Motor with Different Slot-Pole Combinations.

Dynamic characteristics of high-speed motorized spindles affected by rotor's eccentric mass

Dynamic Behavior of Permanent Magnet Synchronous Motor Rotor Radial Eccentricity

Nonlinear Dynamic Analysis Of Rotor-Bearing-Pedestal Systems With Multiple Fit Clearances

Asymmetric Effect of Static Radial Eccentricity on the Vibration Characteristics of the Rotor System of Permanent Magnet Synchronous Motors in Electric Vehicles

Study on Unbalance Magnetic Pull of the Motorized Spindle under Different Rotor Eccentricities.

Dynamic behaviors and contact characteristics of ball bearings in a multi-supported rotor system under the effects of 3D clearance fit

Nonlinear Vibration of Permanent Magnet Synchronous Motors in Electric Vehicles Influenced by Static Angle Eccentricity

Analysis of Nonlinear Phenomena in High Speed Ball Bearings due to Radial Clearance and Unbalanced Rotor Effects

Dynamic characteristics of ball bearing-coupling-rotor system with angular misalignment fault

Nonlinear Dynamic Effect of Thrust Bearing on A Flexible Rotor Bearing System

Dynamic Analysis on Rotor System Supported by Active Electromagnetic Bearings

Analysis of Coupled Vibration Characteristics of PMS Grinding Motorized Spindle

Analysis of Dynamic Characteristics of Rotor-bearing System of High Speed Spindle

Dynamic modeling and simulation of a flexible-rotor ball bearing system

Dynamic Performance of the Bearing-Rotor System in the Ultra-High Speed Electric Spindle with A Additional Supporting System Make Up of the Permanent Magnetic Bearings

Non-Linear Dynamic Analysis on Hybrid Air Bearing-Rotor System under Ultra-High Speed Condition