Abstract:Nonlinear quasi-zero stiffness (QZS) has recently attracted significant attention from the scientific and engineering community as a method for designing low-frequency vibration isolators. However, previous studies primarily used bistable structures and linear springs to provide negative and positive stiffness, respectively, which limits the QZS range and loading capacity of QZS isolators. This work proposes a novel nonlinear stiffness-modulated anti-vibration structure combined with a disc spring group and a volute spring and demonstrates its feasibility for low-frequency vibration isolation under heavy loads. The asymmetrical negative stiffness provided by the disc spring group and hardened positive stiffness provided by the volute spring compensate each other to construct QZS characteristics. Their nonlinearities can weaken each other, which can lead to a wide QZS range. At the QZS position, the disc springs and the volute spring together provide the positive force, which ensures a large loading capacity. By adjusting the design parameters, different QZS characteristics can be conveniently realized. Compared with traditional QZS structures and typical X-shaped structures, the QZS range of the proposed anti-vibration structure can be, respectively, extended by 2.3 and 1.5 times without sacrificing loading capacity. The dynamic equation is derived from the original nonlinear force expression rather than the typical polynomial approximation expression, which can improve the accuracy of the results, especially under large excitation. The displacement transmissibility obtained by the alternating frequency–time harmonic balance method indicates that the proposed anti-vibration structure exhibits the best vibration isolation performance compared with the linear isolators, traditional QZS isolators, and typical X-shaped isolators. In addition, such a stiffness-modulated anti-vibration structure has a higher sensitivity to damping and a lower sensitivity to base excitation amplitude, which makes it more potential for engineering applications. Besides, the validity of the theoretical analysis is verified by static compression tests and dynamic experiments. This work provides a new method for designing and analysing QZS isolators for heavy-duty low-frequency vibration isolation required in many engineering practices.

Magnetically Modulated Tetrahedral Structure for Low Frequency Vibration Isolation with Adjustable Load Capacity

Resonance and Performance Analysis of a Harmonically Forced Quasi-Zero-Stiffness Vibration Isolator Considering the Effect of Mistuned Mass

Modeling and analysis of a torsional magnetic negative stiffness structure for flexible vertical low-frequency vibration isolation

Tetrahedron structure with nonlinear stiffness and inertia modulation for enhanced low frequency vibration isolation

Theoretical modeling and analysis of a quasi-zero-stiffness vibration isolator equipped with extensible and axially magnetized negative stiffness modules

The Design and Analysis of a Novel Passive Quasi-Zero Stiffness Vibration Isolator

Magnetically modulated sliding structure for low frequency vibration isolation

A compact nonlinear stiffness-modulated structure for low-frequency vibration isolation under heavy loads

Three-magnet-ring Quasi-Zero Stiffness Isolator for Low-Frequency Vibration Isolation

A novel permanent magnet vibration isolator with wide stiffness range and high bearing capacity

Design of broad quasi-zero stiffness platform metamaterials for vibration isolation

A Real-Time Controllable Electromagnetic Vibration Isolator Based on Magnetorheological Elastomer with Quasi-Zero Stiffness Characteristic

Generative Quasi-Zero Stiffness Paradigm for Vibration Isolation by Constraining the Constant Force with Hardening Boundaries

Theoretical and experimental analyses of a nonlinear magnetic vibration isolator with quasi-zero-stiffness characteristic

Design and experimental study of a two-stage nonlinear vibration isolators with quasi-zero stiffness

Linear and Nonlinear Stiffness Compensation for Low-Frequency Vibration Isolation: a Comparative Study

A semi-active quasi-zero stiffness vibration isolator based on magnetorheological elastomer with a fast convergence switch control

Design, Experiment, and Improvement of a Quasi-Zero-Stiffness Vibration Isolation System

Large Stroke Quasi-Zero Stiffness Vibration Isolator Using Three-Link Mechanism

Nonlinear compensation method for quasi-zero stiffness vibration isolation

A Non-Smooth Quasi-Zero-stiffness Isolator with Displacement Constraints