Abstract:Lithium–oxygen (Li–O2) batteries, renowned for their exceptionally high theoretical energy density, have garnered significant interest as a prime candidate for future electric device development. However, practical testing often yields unsatisfactory capacity due to the tendency of their solid‐phase discharge products to cover active sites on the electrode surface. Optimizing the growth mechanism of these solid‐phase products and addressing the storage issue to narrow the gap between actual and theoretical capacities stands as the core challenge in Li–O2 battery development. Here, a fluorine‐doped bimetallic cobalt‐nickel oxide (CoNiO2–xFx/CC) with an interlaced catalytic surface (ICS) and an open, corncob‐like structure is proposed as an oxygen electrode. Unlike conventional oxide electrodes with a "single adsorption catalytic mechanism", the ICS of the CoNiO2–xFx/CC electrode offers a compelling "competitive adsorption catalytic mechanism". This is attributed to the diverse selective sites within the ICS, where oxygen sites preferentially facilitate oxygen conversion due to their higher affinity for oxygen, while fluorine sites preferentially contribute to the growth of Li2O2 owing to their stronger affinity for LiO2. This transformation in the formation mechanism of Li2O2 and its morphology from film along the electrode surface to toroidal particles effectively mitigates the issue of buried active sites. Additionally, the unique structure of the CoNiO2–xFx/CC electrode aids in the storage and decomposition of Li2O2 products. Its corncob‐like open architecture not only promotes the capture and release of oxygen but also facilitates the formation of well‐contacted Li2O2/electrode interfaces, akin to a "corn on the cob" design. Consequently, the Li–O2 battery employing the CoNiO2–xFx/CC cathode demonstrates a high specific capacity of up to 30923 mAh g–1 and a lifespan exceeding 580 cycles, surpassing most reported metal oxide‐based cathodes. This work offers a promising solution to the issues of buried active sites and storage of insoluble products in metal‐air batteries. This article is protected by copyright. All rights reserved

Interfacial Electron Redistribution on Lattice-Matching NiS<sub>2</sub>/NiSe<sub>2</sub> Homologous Heterocages with Dual-Phase Synergy to Tune the Formation Routes of Li<sub>2</sub>O<sub>2</sub>

Interfacial Electron Redistribution on Lattice‐Matching NiS2/NiSe2 Homologous Heterocages with Dual‐Phase Synergy to Tune the Formation Routes of Li2O2

In Situ Construction of NiS-MoS2 Nanoheterostructure with Interfacial Electron Redistribution for Li-Oxygen Batteries

Optimizing Eg Orbital Occupancy of Transition Metal Sulfides by Building Internal Electric Fields to Adjust the Adsorption of Oxygenated Intermediates for Li‐O2 Batteries

Coupling MoSe2 with Non‐Stoichiometry Ni0.85Se in Carbon Hollow Nanoflowers for Efficient Electrocatalytic Synergistic Effect on Li‐O2 Batteries

Interfacial Electron Redistribution of Hydrangea‐like NiO@Ni 2 P Heterogeneous Microspheres with Dual‐Phase Synergy for High‐Performance Lithium–Oxygen Battery

CoS 2 Nanoparticles Anchored on MoS 2 Nanorods As a Superior Bifunctional Electrocatalyst Boosting Li 2 O 2 Heteroepitaxial Growth for Rechargeable Li‐O 2 Batteries

Constructed Mott-Schottky Heterostructure Catalyst to Trigger Interface Disturbance and Manipulate Redox Kinetics in Li-O2 Battery

Zn-assisted low-temperature reconstruction of NiCo heterogeneous catalysts for lithium-oxygen batteries

Towards high performance lithium-oxygen batteries: Co3O4-NiO heterostructure induced preferential growth of ultrathin Li2O2 film

Electron redistributed Ni-Co oxide nanoarray as an ORR/OER bifunctional catalyst for low overpotential and long lifespan Li-O2 batteries

Optimizing d-orbital occupation on interfacial transition metal sites via heterogeneous interface engineering to accelerate oxygen electrode reaction kinetics in lithium-oxygen batteries

Coupling interface constructions of hollow Co-Mo mixed multiple oxidation states heterostructure for high-performance aprotic Li-O2 battery

Engineering of MnTe/MnO Heterostructures with Interfacial Electric Field Modulation for Efficient and Durable Li-O2 Batteries

Heterostructured CoO-Co3O4 nanoparticles anchored on nitrogen-doped hollow carbon spheres as cathode catalysts for Li-O2 batteries

Synergistic Adsorption-Electrocatalysis of 2D/2D Heterostructure Toward High Performance Li-S Batteries

Constructing An Interlaced Catalytic Surface Via Fluorine‐doped Bimetallic Oxides for Oxygen Electrode Processes in Li–O2 Batteries

In-situ deposition of Pd/Pd4S heterostructure on hollow carbon spheres as efficient electrocatalysts for rechargeable Li-O2 batteries

Synergistic dual atomic sites with localized electronic modulation enable high-performance lithium–oxygen batteries

Promoting Oxygen Electrode Reaction Kinetics in Photo-Assisted Li-O2 Batteries Through Heterostructure Design and Built-In Electric Field Construction

Superassembly of Porous Fetet(NiFe)octO Frameworks with Stable Octahedron and Multistage Structure for Superior Lithium–Oxygen Batteries