Abstract:Oscillatory flow has many applications in micro-scaled devices. The methods of realizing microfluidic oscillators reported so far are typically based on the impinging-jet and Coanda effect, which usually require the flow Reynolds number to be at least at the order of unity. Another approach is to introduce elastomeric membrane into the microfluidic units; however, the manufacturing process is relatively complex, and the membrane will become soft after long-time operation, which leads to deviation from the design condition. From the perspective of the core requirement of a microfluidic circuit, i.e., nonlinearity, the oscillatory microfluidic flow can be realized via the nonlinear characteristics of viscoelastic fluid flow. In this paper, the flow characteristics of viscoelastic fluid (Boger-type) in a T-shaped channel and its modified structures are studied by two-dimensional direct numerical simulation (DNS). The main results obtained from the DNS study are as follows: (1) Both Weissenberg (Wi) number and viscosity ratio need to be within a certain range to achieve a periodic oscillating performance; (2) With the presence of the dynamic evolution of the pair of vortices in the upstream near the intersection, the oscillation intensity increases as the elasticity-dominated area in the junction enlarges; (3) Considering the simplicity of the T-type channel as a potential oscillator, the improved structure should have a groove carved toward the entrance near the upper wall. The maximum oscillation intensity measured by the standard deviation of flow rate at outlet is increased by 129% compared with that of the original standard T-shaped channel under the same condition. To sum up, with Wi number and viscosity ratio within a certain range, the regular periodic oscillation characteristics of Oldroyd-B type viscoelastic fluid flow in standard T-shaped and its modified channels can be obtained. This structure can serve as a passive microfluidic oscillator with great potential value at an extremely low Reynolds number, which has the advantages of simplicity, no moving parts and fan-out of two.

RETRACTED: A short review on analytical methods for the capillary oscillator in a nanoscale deformable tube (Retracted Article)

Vibration Analysis of Fluid-Conveying Nanotubes Embedded in an Elastic Medium Considering Surface Effects

Molecular dynamics simulation of a nanoscale feedback-free fluidic oscillator

Fundamental Effects in Nanoscale Thermocapillary Flow

FREE VIBRATION ANALYSIS OF FLUID-CONVEYING CARBON NANOTUBE VIA WAVE METHOD

RETRACTED ARTICLE: on the Dynamics of an Ultra-Fast-rotating-induced Piezoelectric Cantilevered Nanodisk Surrounded by Viscoelastic Foundation

Numerical Investigation of T-Shaped Microfluidic Oscillator with Viscoelastic Fluid

Energy Dissipation of Damping Cantilevered Single-Walled Carbon Nanotube Oscillator

Ultrahigh frequency longitudinal oscillators from single-walled carbon nanotubes

The Inconsistency of Nonlocal Effect on Carbon Nanotube Conveying Fluid and a Proposed Solution Based on Local/nonlocal Model

Thermally Driven Large-Amplitude Fluctuations in Carbon-Nanotube-based Devices: Molecular Dynamics Simulations

Thermal noise reduction of mechanical oscillators by actively controlled external dissipative forces

Nonlinear oscillation of nanoelectro-mechanical resonators using energy balance method: considering the size effect and the van der Waals force

Thermal nonlinearities in a nanomechanical oscillator

Vibration Analysis of Suspended Microchannel Resonators Characterized As Cantilevered Micropipes Conveying Fluid and Nanoparticle

Quasi-Reversible Energy Flows in Carbon-Nanotube Oscillators

Dynamics of Capillary Flow in an Undulated Tube

Comment on "Dynamic range of nanotube- and nanowire-based electromechanical systems"

Nonlinear Oscillations of CNT Nano-resonator Based on Nonlocal Elasticity: The Energy Balance Method

Electro-osmotic Flow Instability of Viscoelastic Fluids in a Nanochannel

Role of Inter-Tube Corrugation in the Dynamic Sliding Friction of Concentric Carbon Nanotubes: Implications for Nanomechanical Oscillator Devices