Abstract:Ammonia (NH 3 ) is emerging as a potential favoured fuel for longer range decarbonised heavy transport, particularly in the marine sector, predominantly due to highly favourable characteristics as an effective hydrogen carrier. This is despite generally unfavourable combustion and toxicity attributes, restricting end use to applications where robust health and safety protocols can always be upheld. In the currently reported work, a spark ignited thermodynamic single cylinder research engine equipped with gasoline direct injection was upgraded to include gaseous ammonia port injection fuelling, with the aim of understanding maximum viable ammonia substitution ratios across the speed-load operating map. The work was conducted at varied effective compression ratios under overall stoichiometric conditions, with the spark timing re-optimised for maximum brake torque at all stable logged sites. The experiments included industry standard measurements of combustion, performance, and engine-out emissions (including NH 3 "slip"). With a geometric compression ratio of 11.2:1, it was found possible to run the engine on pure ammonia at low engine speeds (1000-1800 rpm) and loads of 12 bar net IMEP. When progressively dropping down below this load limit an increasing amount of gasoline co-firing was required to avoid engine misfire. When operating at 1800 rpm and 12 bar net IMEP, all emissions of carbon (CO 2 , CO, unburned hydrocarbons) and NOx decreased considerably when switching to higher NH 3 substitution ratios, with NOx reduced by ~ 45% at 1800 rpm/12 bar when switching from pure gasoline to pure NH 3 (associated with longer and cooler combustion). By further increasing the geometric compression ratio to 12.4 and reducing the intake camshaft duration for maximum effective compression ratio, it was possible to operate the engine on pure ammonia at much lower loads in a fully warmed up state (e.g., linear low load limit line from 1000 rpm/6 bar net IMEP to 1800 rpm/9 bar net IMEP). Under all conditions, the indicated thermal efficiency of the engine was either equivalent to or slightly higher than that obtained using gasoline-only due to the favourable anti-knock rating of NH 3 . Ongoing work is concerned with detailed breakdown of individual NOx species together with measuring the impact of hydrogen enrichment across the operating map.

Effects of Ammonia Addition on the Performance and Emissions for a Spark-Ignition Marine Natural Gas Engine

Numerical Investigation of a Heavy Duty Compression Ignition Engine Converted to Ammonia Spark Ignition Operation

Numerical Investigation of the Effect of Ammonia Addition on the Performance of a Stoichiometric Operated Natural Gas Spark Ignition Engine

Numerical Simulation of Lean Premixed Combustion Characteristics and Emissions of Natural Gas-Ammonia Dual-Fuel Marine Engine with the Pre-Chamber Ignition System

NOx Generation in Marine Dual-Fuel Engines: Effects of Ammonia Blending Ratio and Spark Ignition Timing

Application of enhanced combustion strategies and optimized ignition timing for achieving high thermal efficiency and low N2O emissions of marine ammonia engine at full-load condition

Effects of Combustion and Emission Performance of Ammonia/natural Gas Engines Ignited by Diesel

Combustion and Emission Characteristics of a Spark Ignition Engine Fueled with Ammonia/gasoline and Pure Ammonia

Numerical investigations on charge motion and combustion of natural gas-enhanced ammonia in marine pre-chamber lean-burn engine with dual-fuel combustion system

Effect of Different Volume Fractions of Ammonia on the Combustion and Emission Characteristics of the Hydrogen-Fueled Engine

Effect of Ammonia Addition on Combustion and Emissions Performance of a Hydrogen Engine at Part Load and Stoichiometric Conditions

Study on the Performance of Premixed Natural Gas/Ammonia Engine with Diesel Ignition

Effect of ammonia/hydrogen blending and injection modes on combustion emission and performance of marine engine

Numerical investigation on the combustion and emission characteristics of ammonia in a low-speed two-stroke marine engine

The effects of ammonia addition on the emission and performance characteristics of a diesel engine with variable compression ratio and injection timing

Effect of Ammonia Addition on Combustion and Emission Characteristics of Hydrogen-Fueled Engine under Lean-Burn Condition

Effects of Hydrogen Volume Fraction, Air Fuel Ratio, and Compression Ratio on Combustion and Emission Characteristics of an SI Ammonia-Hydrogen Engine

Evaluation of ammonia-gasoline co-combustion in a modern spark ignition research engine

Numerical investigation of the effects of adding different gases on the performance and emissions of an ammonia-hydrogen dual-fuel engine

The effects of natural gas composition on conventional dual-fuel and reactivity-controlled compression ignition combustion in a heavy-duty diesel engine

Experimental study on the effect of hydrogen substitution rate on combustion and emission characteristics of ammonia internal combustion engine under different excess air ratio